Question about 1997 Dodge Neon

2 Answers

Check engine light on displaying P1494, P1495 and oxygen sensor

I HAD MY CHECK ENGINE LIGHT CHECKED AND GOT 3 CODES P1495 AND P1494. THE OTHER BEING MY OXYGEN SENSOR, BANK 1 SSENSOR 2. If some one can tell me where to find the oxygen sensor and if it is a upstream/downstream. And how can I get rid of the ..94/95 error codes. I cant find any details on it anywhere.. please help!

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 67 Answers

Bank 1 sensor is down stream of the exhaust manifold and before the catalytic convertor

Posted on Dec 13, 2017

Ad

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Dodge Master
  • 53,765 Answers

Code p 1494 refers to EVAP system leak detected
p1495 is EVAP solenoid /valve fault when searching for fault codes go to the browser page and type in --- fault code ( what ever code you get -- there are plenty of pages describing the fault and how to fix

one entry for each code

Posted on Dec 13, 2017

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

ghassun

ghassun

  • 499 Answers

SOURCE: check engine light is on...bank 1 sensor1 oxygen sensor

if u have one oxygen sensor then u need to take a deep look at the bottom of ur car it will be somewhere at the Exhaust pipe if u have a catalytic converter then u will have two oxygen sensors one before the catalytic converter & the other will be after the catalytic converter. Note: the catalytic converter is located at after a little bit of beginning in Exhaust pipe.

Posted on Jun 06, 2009

ZX2Fast

Brad Kirby

  • 547 Answers

SOURCE: check engine light code P0171

That code is a good O2 sensor reporting a lean condition. Lazy people and part stored just say it is the O2 sensor because they don't know how to fix it. Bank 1 is the side of the engine with the number one cylinder. That bank has a lean condition meaning it doesn't have enough fuel for the given amount of air. Since this is only affecting one side of the engine, that narrows down possible causes. Possible causes would a leaking intake gasket or a broken vacuum hose on that side. Since both sides get fuel from the same pump and rail, this wouldn't be a fuel pump or regulator issue. It can, however, be an indication of a bad fuel injector on that side of the engine. The MAP sensor also couldn't cause this code because, just like the fuel pump, that MAP sensor works for both sides of the engine and the code is only for one side. I would drive it for a couple more days to see if you get any additional codes that could help point you towards the actual problem. In the meantime, I would check for vacuum leaks (look at the rubber hoses and listen for high pitch hissing or sucking sounds.)

Posted on Mar 03, 2011

Tarik Kaid

  • 134 Answers

SOURCE: On a 2004 Dodge Caravan, the code P0032 apparently

bank 1 sensor 1 is the o2 sensor on the bank with cylinder #1 on the engine side of the catalytic converter.

Posted on Jun 24, 2011

Anonymous

SOURCE: On a 2004 Dodge Caravan,

Bank #1 is on the side that cylinder #1 is on

Sensor #1 is the one closest to the engine (upstream)

Sensor #2 is the rear or monitor,they don't
get replaced (downstream)

Posted on Jun 24, 2011

emissionwiz

Marvin

  • 85223 Answers

SOURCE: 2000 Dodge Durango is generating Check engine

Hello
Lets look at these codes and what they imply is a problem.
P0135 - O2 Sensor Heater Circuit Malfunction Bank 1 Sensor
P0155 - O2 Sensor Heater Circuit Malfunction Bank 2 Sensor
The O2 sensors in this system have tiny wire filament heater in them, this allows the O2 to reach operating temperature very fast, if you turn the key on and wait a few seconds on a cold engine you will feel the sensors get hot very quickly, hot enough to burn your fingers. Here are the reason's that cause the codes to set for the heater circuits of the sensors.

Heated Oxygen Sensor (H2OS) Banks 1 and 2 Sensor #1 circuit open shorted to ground.
- Heated Oxygen Sensor (H2OS) Banks 1 and 2 Sensor #1 circuit poor electrical connection.
- Faulty Heated Oxygen Sensor (H2OS) Banks 1 and 2 Sensor #1 circuit (both of them, no not likely)
- Heated Oxygen Sensor (H2OS) Banks 1 and 2 Sensor #1 circuit fuse or fuses blown/open. (Very likely)
- Faulty Engine Control Module (ECM) (very unlikely)

Posted on Sep 15, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What does code p1131 mean on a 2001 ford taurus


P1131 Ford
P1131 Ford - Lack of Upstream Heated Oxygen Sensor Switch Sensor Indicates Lean Bank 1

Repair Importance Level: 3/3

Repair Difficulty Level: 2/3

http://engine-codes.com/p1131_ford.html

Forum Code

Possible causes

- Faulty Oxygen Sensor

- Vacuum leak affecting bank 1 only

- Fuel injector problem bank 1

- Check for cylinder misfire on bank 1

- Engine mechanical condition

Tech notes

Though the Oxygen (O2) sensor, the Engine Control Module (ECM) has detected a lean system, which means that there is either not enough fuel or and excessive amount of air in the system. Start by checking for vacuum leaks.

When is the code detected?

The Engine Control Module (ECM) detected bank 1 oxygen (O2) at its lean limit

Possible symptoms

- Engine Light ON (or Service Engine Soon Warning Light)

P1131 Ford Description

A Heated Exhaust Oxygen (HO2S) sensor indicating rich at the end of a test is trying to correct for an over-lean condition. The test fails when the fuel control system no longer detects switching for a calibrated amount of time.

Read more: http://engine-codes.com/p1131_ford.html#ixzz3izk89wMu

Aug 16, 2015 | Ford Cars & Trucks

Tip

Which Oxygen Sensor Is It?


There are many inquiries online about which oxygen sensor to change. Oxygen sensor failure codes are very common on a lot of vehicles. With all of today's vehicles having at least two oxygen sensors and many having three or four of them, it can be a little confusing as to which one is causing the problem.

Before we get into which sensor is which, we need to have a little discussion about oxygen sensor fault codes. There are several different types of oxygen sensor fault codes. Here are just some of the most common ones:

P0135 "Oxygen Sensor Heater Circuit Bank1 Sensor 1"
P0141 "Oxygen Sensor Heater Circuit Bank 1 Sensor 2"
P0147 "Oxygen Sensor Circuit Bank 1 Sensor 3"
P0152 "Oxygen Sensor Voltage High Bank 2 Sensor 1"
P0159 "Oxygen Sensor Slow Response Bank 2 Sensor 2"
P0171 "Oxygen Sensor Lean Sensor 1 Bank 1"
P0172 "Oxygen Sensor Lean Sensor 1 Bank 2"
P0174 "Oxygen Sensor Rich Sensor 1 Bank 1"
P0175 "Oxygen Sensor Rich Sensor 1 Bank 2"

There are many more possible oxygen sensor codes, but I only listed these to make my point. Many times the oxygen sensor code is NOT caused by the oxygen sensor itself. "Lean" or "Rich" oxygen sensor codes (i.e. P0171, P0174) are usually caused by something other than the oxygen sensor. Something is wrong, causing the engine to run lean (not enough fuel or too much air) or causing the engine to run rich (too much fuel or not enough air). In these cases, replacing the oxygen sensor will not fix a thing. (That is, unless you are trying to fix your bank account from having too high of a balance!) The new oxygen sensor will just set the same code as the original one. This is because the oxygen sensor is not CAUSING the problem, it is only REPORTING the problem.

High voltage codes (like P0152 above) can be caused by the oxygen sensor wires being shorted to another wire inside the wiring harness. Sometimes these codes are caused by bad grounds where some other component is trying to ground through the oxygen sensor circuit. Again, replacing the oxygen sensor will not fix this! In short, the problem needs to be diagnosed before running out and buying an oxygen sensor.

Just because a fault code has "Oxygen Sensor" or "O2 Sensor" or "O2S" in its description does not necessarily mean that an oxygen sensor needs to be replaced. Many do-it-yourselfers believe that all there is to fixing the car is to hook it to the "magic box", collect the fault codes and replace the parts the computer tells you to replace. There is nothing further from the truth.

Fault codes only point you toward which SYSTEM is failing. The system must be diagnosed to find the CAUSE of the failure. If this is not done properly, it will only result in wasting a bunch of your money. This is what you were trying to avoid by doing it yourself!

So, after reading all of the above, if you think you still want to replace an oxygen sensor, but don't know which one; here is how to figure it out:

Oxygen sensors are always numbered like this:

Bank 1 Sensor 1
Bank 2 Sensor 1
Bank 1 Sensor 2
Bank 2 Sensor 2

Some manufacturers use a kind of shorthand that reads different, but means the same thing:

Sensor 1/1 or O2s 1/1
Sensor 2/1 or O2s 2/1
Sensor 1/2 or O2s 1/2
Sensor 2/2 or O2s 2/2

Bank 1 is always the side of the engine where cylinder #1 is located and, of course, Bank 2 is the opposite side.
On a 4 cylinder engine, there is only one bank and it is always referred to as Bank 1. The exception to the 4 cylinder rule is on certain 4 cylinder engines (specifically, some Toyotas) there are two catalytic converters used. In this case, Bank 1 sensors will still be in the pipe for the catalyst that is connected to cylinder #1 and Bank 2 sensors will be in the other one.

Sensor 1 is always the "upstream" sensor (the one located BEFORE the catalytic converter).
Sensor 2 is always the "downstream" sensor (the one that is located AFTER the catalytic converter).
Sensor 3 refers to the ONLY "downstream" sensor where there are two sensors before the catalyst and only one after the catalyst. On very few vehicles the reference to this reads "Bank 1 Sensor 3".

If you do not know where cylinder #1 is, then you need to get a diagram of the firing order for your engine. Just post a question on FixYa.com and make sure you give the YEAR, MAKE, MODEL, and ENGINE SIZE of your vehicle and one or more of our experts will be happy to tell you how to find cylinder #1.

- DTTECH
ASE Certified Master Automobile Technician


Also check out this article by dttech: What Else Could Be Wrong?

on Apr 29, 2011 | Ford F-150 Cars & Trucks

1 Answer

Check engine light came on code P0505, P0135, P0155, P1494.


kia ora Mark , greetings , sorry bro these code things are beyond me ive been driving around with a p0161. i believe its a bank2 down stream sensor for 2 years , maybe you can help me , 2002 grand cherokee 4.7 Ho , do you know what brand of sensor or part numbers i need , an idea of cost for same . i forgot to mention i am in New Zealand and auto parts are so much more expensive here , no idea at all , much help needed everyone thank you all , hope you get sorted Mark cheers mate

May 19, 2014 | 2002 Jeep Grand Cherokee

1 Answer

2002 toyota avalon engine check light on P0078 and P007C


P0050 HO2S Heated Oxygen Sensor -Control Circuit (Bank 2 Sensor 1)

P0051 HO2S Heated Oxygen Sensor -Control Circuit Low (Bank 2 Sensor 1)

P0052 HO2S Heated Oxygen Sensor -Control Circuit High (Bank 2 Sensor 1)

P0053 HO2S Heated Oxygen Sensor -Resistance (Bank 1 Sensor 1)

P0054 HO2S Heated Oxygen Sensor -Resistance (Bank 1 Sensor 2)

P0055 HO2S Heated Oxygen Sensor -Resistance (Bank 1 Sensor 3)

P0056 HO2S Heated Oxygen Sensor -Control Circuit (Bank 2 Sensor 2)

P0057 HO2S Heated Oxygen Sensor -Control Circuit Low (Bank 2 Sensor 2)

P0058 HO2S Heated Oxygen Sensor -Control Circuit High (Bank 2 Sensor 2)

P0059 HO2S Heated Oxygen Sensor -Resistance (Bank 2 Sensor 1)

P0060 HO2S Heated Oxygen Sensor -Resistance (Bank 2 Sensor 2)

P0061 HO2S Heated Oxygen Sensor -Resistance (Bank 2 Sensor 3)

P0062 HO2S Heated Oxygen Sensor -Control Circuit (Bank 2 Sensor 3)

P0063 HO2S Heated Oxygen Sensor -Control Circuit Low (Bank 2 Sensor 3)

P0064 HO2S Heated Oxygen Sensor -Control Circuit High (Bank 2 Sensor 3)

P0065 Air Assisted Injector -Range/Performance

P0066 Air Assisted Injector -Circuit Malfunction or Circuit Low

P0067 Air Assisted Injector -Circuit High

P0068 (MAP) Manifold Absolute Pressure /(MAF) Mass Air Flow - Throttle Position

Correlation

P0069 (MAP) Manifold Absolute Pressure / (BARO)Barometric Pressure Correlation

P0070 Ambient/Outside Air Temperature Sensor -Circuit Malfunction

P0071 Ambient/Outside Air Temperature Sensor -Range/Performance Problem

P0072 Ambient/Outside Air Temperature Sensor -Circuit Low Input

P0073 Ambient/Outside Air Temperature Sensor -Circuit High Input

P0074 Ambient/Outside Air Temperature Sensor -Circuit Intermittent

P0075 Intake Valve Control Solenoid Circuit Malfunction (Bank 1)

P0076 Intake Valve Control Solenoid Circuit Low (Bank 1)

P0077 Intake Valve Control Solenoid Circuit High (Bank 1)

P0078 Exhaust Valve Control Solenoid Circuit Malfunction (Bank 1)

P0079 Exhaust Valve Control Solenoid Circuit Low (Bank 1)

P0080 Exhaust Valve Control Solenoid Circuit High (Bank 1)

P0081 Intake valve Control Solenoid Circuit Malfunction (Bank 2)

P0082 Intake Valve Control Solenoid Circuit Low (Bank 2)

P0083 Intake Valve Control Solenoid Circuit High (Bank 2)
P0084 Exhaust Valve Control Solenoid Circuit Malfunction (Bank 2)

Mar 22, 2013 | 2002 Toyota Avalon

2 Answers

What does the codes p0442,p0136 &p0141 mean on my 2001 ford taurus it failed inspection for these codes


P0442 FORD - Evaporative Emission System Leak Detected Small Leak

Possible causes- Missing or loose fuel cap
- Incorrect fuel filler cap used
- Fuel filler cap remains open or fails to close
- Foreign matter caught in fuel filler cap
- EVAP canister or fuel tank leaks
- EVAP system hose leaking
- Fuel tank leaking
P0136 - O2 Sensor Circuit Malfunction Bank 1 Sensor 2
Possible causes- Rear Heated Oxygen Sensor Bank 1 harness is open or shorted
- Rear Heated Oxygen Sensor Bank 1 circuit poor electrical connection
- Faulty Rear Heated Oxygen Sensor Bank 1
- Inappropriate fuel pressure
- Faulty fuel injectors
- Intake air leaks may be faulty
- Exhaust gas leaks

P0141 FORD - O2 Heater Circuit Bank 1 Sensor 2

Possible causes- Faulty Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2
- Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 circuit fuse
- Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 circuit open shorted to ground
- Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 circuit poor electrical connection
- Faulty Engine Control Module (ECM)

Sep 27, 2012 | 2001 Ford Taurus

2 Answers

P0138 and p0158


These codes, po 138 bank 1 sensor 2 shorted to voltage and code po158 means bank 2 sensor two shorted to voltage. these are the two rear oxygen sensors in the exhaust system. there two up frt and two in the rear, check the wiring on the two rear sensors, make sure that the wiring is not cut or stuck between metal. if the wiring is good then replace both rear sensors, when you get them ask for the left and right after the cat sensors. or bk1 s2 and bk2s2. after replacing them reset the computer. go to an auto parts sotre or if you have a code reader you can do it. hope this helps good day.

Feb 19, 2012 | 2004 Dodge Stratus

1 Answer

Check engine light on- auto zone scanner shows error code p0053 probable cause: 1.-check circuit fuse 2.-relay defective 3.-check circuit wiring Where are fuse and relay located?


The code P0053 is for your Bank 1 Oxygen Sensor, the closest Oxygen Sensor to the engine, connected to the Exhaust. Replace your Oxygen Sensor, clear the code, and see if it comes back.

I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514

Mar 12, 2011 | Chevrolet Suburban 1500 Cars & Trucks

1 Answer

P0421 warm up catalyst...below threshold (bank 1).. 1st of all, what is BANK 1 and is P0421specific to the problem or it is just a general code for cat converter or oxygen sensor


A v-6 or v-8 engine will have two banks. Bank one is the side of the engine with the number 1 cylinder. Bank 2 is the other side of the engine. In your case Bank 1 is cylinders 1-3-5 on the back side of the engine closest to the firewall. Bank 2 is cylinders 2-4-6 on the other side of the engine.

You have two cats bank 1 and bank 2. There are two oxygen sensors before each cat that help determine fuel trim and are refered to as sensor 1 and two oxygen sensors after the cats that monitor cat efficiency and are referred to as sensor 2. The bank 1 sensor 2 O2 sensor is either providing a higher than expected signal or is switching like the sensor 1 O2's. If either of these has occurred the PCM detects that the cat is no longer working as it should and sets the code/turns on the check engine light.

9 times out of 10 it is a cat that has gone bad.

I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

Nov 16, 2010 | 2002 Mitsubishi Galant

2 Answers

2005 gallant with O2 sensor engine light is one...how do I fix it?


have the engine light code scanned, and it'll tell you if it's bank 1 sensor 1, bank 1 sensor 2, bank 2 sensor 1, bank 2 sensor 4.

Bank 1 is on the same side as Cylinder 1
Bank 2 is on the opposite side of Cylinder 1

Sensor 1 is located before the catalytic converter.
Sensor 2 is located after the catalytic converter

Sep 11, 2009 | 2001 Mitsubishi Galant

2 Answers

How many oxygen sensors in a 2001 chrysler sebring 3.0


17c3292.jpg

Fig. Heated Oxygen (HO2S) location (sensor 1)-2.4L engine

db6f426.jpg

Fig. Heated Oxygen (HO2S) location (sensor 2)-2.4L engine

99e413c.jpg

Fig. Heated Oxygen (HO2S) location (bank 1, sensor 2) (bank 2, sensor 2)-2.7L engine

e2a250f.jpg

Fig. Heated Oxygen (HO2S) location (bank 2, sensor 1)-2.7L engine

I hope help you with this (rated this help). Good luck.

Sep 09, 2009 | 2001 Chrysler Sebring

Not finding what you are looking for?
1997 Dodge Neon Logo

Related Topics:

720 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...