How to replace chevy prizm center brake light bulb

SOURCE: 1994 chevy k1500

Have you checked or made your own earth source..Have you checked that you have power at the tail lights

SOURCE: 1994 CHEVY K1500 BRAKE LIGHTS DON'T WORK TOP CAB LIGHT WORKS

I figured out my problem!
From the VERY BEGINING... I changed my brake pedal switch with a BRAND NEW switch, and the lights still didn't work.

Well, I went back down there with a live wire and touched the contacts..and guess what.. the brake lights lit up!

I got a faulty NEW brake pedal switch!! I went a year with this problem, so learn from my issue, test even your new parts if it doesn't fix the problem to completely rule it out!

I hope you guys figure out what's going on with your issue.

SOURCE: 2007 Chevy Silverado Center brake light works but back ones dont

There is a probable bad wiring connection in problem one and three.
#2 Possible water leak causing bulb break. Try wd40 in socket. you need a wiring diagam and cheap voltmeter if you want do it yourself.

SOURCE: Brake lights on a 2003 chevy silverado 2500HD wont work.

same bulb but 2 seperate elements. wiring diagram u should be able to obtain from your local auto parts store like autozone(preferred)

SOURCE: 99 Chevy Tahoe... Rear turn signals, brake lights, and hazards

I had this problem, and to be honest, it happened to the left side about a week later...it's the board that the bulbs plug into...it's a very common problem with this model. So popular that you can normally get the socket board off the shelf at a parts store! it's extremely simple to replace, and I replaced all the bulbs at the same time!