Remove door panel 2007 corvette - 2007 Chevrolet Corvette Convertible

SOURCE: 1992 corvette Lt1

You have to remove the door lock knob to get to the screw. Make sure door is unlocked,then you take an pull the knob outward til pops off.Then you should be able to remove the screw.

SOURCE: how do you remove the door panel on a 1997 corvette?

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

SOURCE: How to remove interior door panel on 2006 c6

They say it best here,I hope this helps. Tehy are replacing door handles, good luck.

http://dsvettes.com/new/pdf/DSV_passenger_door_handle_install.pdf

http://dsvettes.com/new/pdf/DSV_driver_door_handle_install.pdf

SOURCE: How do I remove the driver's door panel on a chevy 2007 nbs?

open door pull ruber boot back on door side unplug wire connections snap lock release on con pull pins pull door