Question about Cars & Trucks
Able to get horns to work at one point , from steering wheel & manually at relay,now i have clicking noise at horns but no sound & when i try to assemble steering wheel to adapter my cab light goes dim. please help.p.s i cleaned contact on relay,also is the horn wire to steering suppose to be hot ? THANKS AGAIN ,TJ
You hear clicking at horns, and not the relay? Maybe the horns went bad, or maybe you need to check and clean the connections there.
Don\'t know why the cab light went dim, unless the horn wire was trying to make contact?
Yes, TJ, the horn wire should be hot. You are grounding that hot wire when you press for the horn. That hot wire comes from the coil side of the horn relay. Press for horn, it grounds the coil side of relay, and the relay can pass power to the horns.
Now back to the clicking no-honker horns: power gets to the horns when relay is energized, and there has to be a good ground for horns to work. I don\'t know if your horns are case grounded or a wire from horns goes to ground, but check the ground there. If case grounded, pull horns off and clean the ground. Also might try a known good horn. Keep at it, sounds like you are almost there.
Posted on Dec 30, 2012
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Usually the wire from the steering wheel is Green w/Red and the wire to the horn from the fuse box is White. There is only one fuse, sometimes shared with the emergency lights. Check to see if there is power to the horn itself with a volt meter.
Posted on Dec 30, 2008
save yourself the hassle , buy yourself a momentary 12volt switch drill a nice clean hole on your driversside dash and re-wire your horn to it, all the screwing around you'll do to figure out why toyota makes cheesy horn contacts you could have your problem fixed..
on one side of the switch you should run a wire that is a 12volt switched +
on the other side I would run another side run a new power wire to your horn
leave your horns stock ground and just replace the HOTLINE ..
you could even go as far as installing a la cou ca racha horn to bring back that 70's Lowrider feel lol
Posted on Jan 16, 2009
replace the clock-spring ribbon contact under the steering wheel, that is the problem, u have lost the connection due to a broken ribbon contact.
Posted on Jan 27, 2009
Tips for a great answer:
Mar 17, 2018 | 1992 Geo Metro
Dec 02, 2015 | Ford Cars & Trucks
Jan 01, 2013 | 1999 Plymouth Voyager
Sep 01, 2011 | 2001 Chevrolet Silverado
May 03, 2011 | 2002 Volkswagen Beetle Turbo S
Mar 19, 2011 | 2001 Ford F150 Styleside SuperCrew
Jan 09, 2011 | 2004 Buick Century
Sep 06, 2010 | 2004 Honda Accord
Jan 25, 2020 | Toyota Cars & Trucks
337 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: