SOURCE: no heat in vehicle . both heater hoses are hot
the temp blend door is broken, they break all the time.
SOURCE: 2001 Chevrolet Silverado How to remove rear axle
Remove...
wheels, drums or rotors, the cover for the differential (You will need a drip pan)
remove the "pin" (usually a 5/15" or 8mm head) that secures the spider gear pin. Remove the long spider gear pin, as it should slide out without a lot of force.
Push both axles inward, and remove the left and right "c" clips that hold the axles in.
Note... if you have a limited slip, it may be a little different of a set up due to clutches in the differential.
SOURCE: 1989 chevy silverado heater blowes cold air. both
Feel the hoses going into the heater on the firewall. If one is hot and the other is cool, then the heater control valve is not working for whatever reason. Check the flow valve.
SOURCE: 2006 chev silverado heater blowing cold air,
heater core might be clogged
Testimonial: "This worked fine I was thinking I would have to tear the heater apart, the temputure here has been 0 to about 20 THANKS for the help"
SOURCE: 2000 Chevrolet Silverado Heater Hose Connector
Go to the dealer. He'll get it for you. Otherwise you cpuld make something that would work remember its only 20psi's there. i would need a photo of the area affected and I could probablytell you how to fabricate something that will work.
313 views
Usually answered in minutes!
×