Is the blower motor working?
SOURCE: adjusting 2001 nissan frontier headlights
The adjustment screws/nuts should be located either on the top of the headlamp assembly,
behind the headlamp assembly, or near the frame rail by the radiator
support.
If you have one adjustment screw, it will control your vertical aim. If you have two adjustment screws, one will control your vertical aim and the other will control your horizontal aim
Park
your car on a level ground 30 feet from a wall and measure the height
from the ground to the bulb and mark on a wall (do this for highs beams
and low beams if the bulbs are separate, if highs and lows are the same
bulb, only do it for the lows)
If the headlights read VOR, then
aim the brightest part or cutoff part just below the mark on the wall.
If it says VOL or nothing, aim them 2 inches below the mark on the wall.
SOURCE: nissan frontier 2001 has spark and fuel cranks but
my truck won't start but .. no click just a little kinda grind and then stop .. is it the starter ?
125 views
Usually answered in minutes!
and you would here a/c come on before but no anymore nothing
i check the fuses in the truck they were fine,do they have fuses under the hood for the blower
http://www.autozone.com/autozone/repairi...http://www.autozone.com/autozone/parts/D... be your blower motor resister,it's located next to blower,easy to remove.click on link to see.
×