I noticed 2 wires were pulled out of crank sensor while I was changing water pump
SOURCE: 2001 GMC Sonoma Engine stopped while driving
sounds like it could be plugged injectors or a timing problem.
SOURCE: Pulling a fan clutch assembly from a GMC 4.3 water pump?
First remove the fan from the clutch. There should be four to six bolts holding the fan to the clutch. The clutch is held on to the pump with four bolts. remove the four bolts to remove the clutch. I've included a pic of the pump to indicate the four mounting holes. Not sure if the link will work.
http://www.1aauto.com/scripts/view_full_image.php?image_url=http://images.1aauto.com/EWP/1AEWP00011.jpg&description_id=1090439
SOURCE: i need a 94 gmc sonoma wiring diagram for car
Try here. ( http://www.the12volt.com/installbay/stereodetail/1003.html ), or ( http://www.the12volt.com/ )
SOURCE: need wiring diagram for a 2001 GMC 3/4 ton 4x4 8.1
Try this website for resolving car problems by downloading a FREE
service manual for your vehicle. This is not an owners manual but a
factory mechcanic's manual.
http://ezinearticles.com/?Find-the-Free-Auto-Repair-Manual-You-Need-Online&id=92717
SOURCE: I have a1994 gmc Sonoma. Fuel pump fuse keeps
The only other things on that circuit are your PCM(power control module) and the fuel pump/oil pressure switch. You can start with that but it is more than likely a ground somewhere on that circuit. If this helped four thumbs up please.
391 views
Usually answered in minutes!
×