Question about 1997 Isuzu Rodeo
Make sure battery has a full charge and battery connections all good, on both ends, not just at the battery. I looked at info for 4 cylinder engine. You can see the two fuses, not only check the fuses, use a test light and check voltage at fuse circuit. The main fuse is hot all the time. The starter fuse goes hot with key in start position, so you need a helper to turn the key while you check for voltage at the fuse. At the starter motor, two voltage circuits, one comes from the battery, hot all the time. The other circuit goes hot with key in the start position and is wired through clutch switch and starter relay. The starter motor grounds through the engine block. If good voltage and ground circuits at the starter motor and no action, have to check starter motor and make sure the engine isn't seized. Any testing at starter motor, make sure tranny is in park or neutral and parking brake is set.
Posted on Mar 06, 2018
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Feb 04, 2015 | 1997 Isuzu Rodeo
Jul 01, 2014 | 1997 Isuzu Rodeo
Jun 09, 2014 | 2001 Isuzu Rodeo
Apr 06, 2012 | 1997 Isuzu Rodeo
Apr 25, 2009 | 1997 Isuzu Rodeo
92 people viewed this question
Usually answered in minutes!