Cars & Trucks Logo
Bobby Posted on Jan 18, 2013
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Where is the crank shaft sensor on a 93 chevy truck 1500 4.3 liter

My 93 Chevy 1500 has no spark and no fuel from injectors. there is fuel to the TBI and engine turns over but will not start

1 Answer

Anonymous

Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Governor:

An expert whose answer got voted for 20 times.

New Friend:

An expert that has 1 follower.

  • Expert 140 Answers
  • Posted on Jan 19, 2013
Anonymous
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Governor:

An expert whose answer got voted for 20 times.

New Friend:

An expert that has 1 follower.

Joined: Jun 21, 2011
Answers
140
Questions
2
Helped
33504
Points
430

Should be by the crankshaft pulley front bottom of engine

5 Related Answers

jim

  • 10 Answers
  • Posted on May 28, 2009

SOURCE: Help w 1994 chevrolet truck

disconnect the batt. is your fuel pump running check fuse listen for it

Ad

Anonymous

  • 580 Answers
  • Posted on Jul 08, 2009

SOURCE: 92 chevy 1500 5.7 tbi starts and dies. replaced

Try using a good fuel line/injector cleaner Seafoam is a good one. If this does not help you may have tone or more clogged injectors. Clean these out and you should be good to go. tTo see Seafoam in action goto you tube type Seafoam into the search box.

Anonymous

  • 1 Answer
  • Posted on Dec 18, 2008

SOURCE: 2000 chevy blazer, truck cranks

Does your battery go dead?

Anonymous

  • 1263 Answers
  • Posted on Apr 30, 2009

SOURCE: how to install a throttle position sensor on 93' 4.3 chevy 1500 truck

the two bolts that hold the sensor are torqued to 18 inch pounds. other than that it's self adjusted through the ecm

Anonymous

  • 1486 Answers
  • Posted on Jul 19, 2009

SOURCE: 1987 chevy S10 engine idle problem

relace the throtle air idle valve.The temp switch will allso cause this problem.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

I have a TBI on my Chevy and when I turn the key on it keeps running the fuel pump after the 2 seconds like to know what to look for and where to find it

didnt specify year model or engine --generic answer --if the tbi is flooding ---check the fuel pressure regulator --and the tbi itself
0helpful
3answers

96 Chevy Silverado 1500 5.7 liter V8 will not start good fuel pump fuel filter good fuel pressure no start. If you put gas or a catalyst into the intake it starts

no signal for the injectors
check cam/crank position sensors
check immobilizer operation
check ecm and harness connections
0helpful
1answer

2001 4.3 chevy 1500 pickup truck has no spark or gas

crank shaft position sensor will shut off both spark and injectors
0helpful
7answers

I have a 1995 chevy k 1500 350 tbi it hesitates when trying to accelerate changed plugs wires cap and rotor it dose have aftermarket tbi and performance intake it dose it hot or cold thanks

hesitation with TBI is sometimes a dirty Injector, make sure you have a good fan pattern on the injector and make sure its responcive. use a nylon wire brush to clean the tip, and alot of carb cleaner, also make sure that your butterfly moves freely, they tend to get gue/carbon build up on them and this will also cause a hesitation
0helpful
2answers

I have 93 gmc 1500 truck with throttle bodey

Check your fuel regulator and replace the injectors.
12helpful
6answers

90 chevy 350 with TBI starts but wont stay running changed fuel filter and fuel regulator dont know what next

I have a 90 chevy k1500 350 tbi with same problem! I have traced problem to... after turning on key fuel pump kicks on when u crank it over injectors shoot gas and truck starts! After few seconds injectors stop spraying and truck dies! This can happen many times over and over! Eventually sometimes truck stays running and all is great! I changed ignition module, oil pressure sending unit (which i was told controls gas after vehicle is running) fuel filter, computer, fuel pump relay, I am at a loss now! Hope this helps and hope someone can help me!
2helpful
2answers

97 chevy 4.3 liter no spark no fuel pump running.

4.3 and 2.8 motors have a ceramic module in the distributor. if you have alot of miles on the truck, and there is no spark, that module is usually the culprit. easy to replace with a nut driver and some dielectric grease. mod is located in the distributor when you take the cap off look straight dowm and its right there.
also check eec relay and fuse. that will also cause the prob.
2helpful
1answer

93 chevy 350 throddle body problem

Hello;
The injector assembly also contains the pressure regulator. Since the truck has been sitting, you may have some corrosion in the regulator and the injectors. Try a fuel cleaner and the work on the regulator.
Thanks;
Rich;
RPM Northwest
1helpful
2answers

GM TBI low voltage at the injectors

sounds like a computer issue on the burb, but i would check the IAC(idle air control) valve and the TPS(throttle position sensor) first.
I would start with the IAC on the 93'.
1helpful
2answers
Not finding what you are looking for?

1,951 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...