Codes to reset a security system for a 1997 pontiac bonneville

SOURCE: serpentine belt for 1997 pontiac bonneville sse w/ supercharger

http://www.mvreader.com/multiview/dayco/catalogSearch.php?autoCatalogSearch=1&make=PONTIAC&model=BONNEVILLE&year=1997&year_from=&year_to=&engine=All&l=n

This should help. Please Rate My Response! Thanks!

Mike Butler

• 6674 Answers
• Posted on May 26, 2009

SOURCE: need diagram how to install serpitine belt on 1997 pontiac bonneville se 3800

8th digit of your vin# needed. Is it an "L", "C" or "K" ?

SOURCE: looking for fuel filter location on my 97 pontiac bonneville

It is located under the drivers side floor acessable from under the vehicle. For pics and instructions check out .http://www.pfyc.com/supportfiles/gasfilter/

Your rating is very important to me

Was this helpful?

Harvey N Tawatao

• 3854 Answers
• Posted on Aug 11, 2009

SOURCE: How to program a keyless remote for a Pontiac

NOTE: You must have the correct part number on the remote for it to work. The part number you need is 15732803.
Transmitter programming per the GM manual:
Before entering the programming mode, verify the possession of all the transmitters you will be using on the vehicle. Once you program the transmitter, the memory erases the other transmitters. You may program up to 4 transmitters.

1. Turn OFF the ignition switch
   
2. Usa a fused jumper (3 amp is sufficient) and connect terminal 8 (back/white wire) to terminal 4 (black wire)
   
3. Close all the doors
   
4. Turn ON the ignition switch / the doors will lock
   
5. Press and hold the following buttons on one of the transmitters for 30 seconds: lock and unlock
   
6. After a 30 second delay, the doors will lock and unlock Important: 
   DO NOT turn OFF the ignition . If the switch is turned OFF the first transmitter becomes inoperative.
   
7. In order to program extra transmitters repeat Step 5
   
8. Disconnect the fused jumper wire from the data link connector
   
9.  Turn off ignition
   
10. Verify functions of all programmed transmitters.
    

ZJ Limited

• 17989 Answers
• Posted on Mar 05, 2010

SOURCE: trying to install serpantine belt for a 1997 pontiac bonneville

1997 PONTIAC BONNEVILLE - V6 3.8L 231ci GAS FI N K
Belt Routing Diagram - Multiple Accessory




1997 PONTIAC BONNEVILLE - V6 3.8L 231ci GAS FI S 1
Belt Routing Diagram - Idler, Tens. & SC





1997 PONTIAC BONNEVILLE - V6 3.8L 231ci GAS FI S 1
Belt Routing Diagram - Multiple Accessory




Hope help with this (remember rated this help).