2013 dodge ram 1500 rear stereo speaker colors

SOURCE: need stereo wiring diagram

1998 Dodge Ram 1500 Truck Car Stereo Radio Wiring Diagram
Car Radio Constant 12v+ Wire: Red
Car Radio Switched 12v+ Wire: Red/White
Car Radio Ground Wire: Chassis
Car Radio Illumination Wire: N/A
Car Stereo Dimmer Wire: Orange/White
Car Stereo Antenna Trigger: Yellow
Car Stereo Amp Trigger Wire: N/A
Car Stereo Amplifier Location: Behind the glove box.
Front Speakers Size: N/A
Front Speakers Location: N/A
Left Front Speaker Positive Wire (+): Dark Green
Left Front Speaker Negative Wire (-): Brown/Red
Right Front Speaker Positive Wire (+): Violet
Right Front Speaker Negative Wire (-): Dark Blue/Red
Rear Speakers Size: N/A
Rear Speakers Location: N/A
Left Rear Speaker Positive Wire (+): Brown/Yellow
Left Rear Speaker Negative Wire (-): Brown/Light Blue
Right Rear Speaker Positive Wire (+): Dark Blue/White
Right Rear Speaker Negative Wire (-): Dark Blue/Orange
-->

SOURCE: 1998 dodge ram 1500 4x4 stereo wiring

glad you posted what colors you do have , cause 2 resources didn't match ,actually 3 , i did find a match to your colors was a 97 year model premium radio, so we have a match .....

black/ light green = ground
dark green = left front spkr +
purple = right front spkr +
blue/white = right rear spkr -
brown/blue = left rear spkr -
brown/yellow = left rear spkr +
blue/orange = right rear spkr +
black/yellow = park lamps
brown/red = left front spkr -
orange = dimmer signal
pink = fused battery +
green/red = radio choke relay
red/white = fused ignition
blue/red = right front spkr -

cheers

djmac62 is also an excellent answer

SOURCE: 2004 dodge ram 1500 rear brake light out how to replace?

Open up the tail gate, you will see two torque screws on the inside beside the tail lights. take these out, this will free up the housing and you can change it from there.

ZJ Limited

• 17989 Answers
• Posted on Aug 31, 2009

SOURCE: how to remove rear seat in 1996 dodge ram 1500

REMOVAL & INSTALLATION

1. Clamp the seat belts to keep them from retracting.
2. Locate and disconnect seat wiring at the connector(s).
3. Move front seats forward or back for access to the hold down hardware.
4. Put the rear seats in the stowed position.
5. On Durango 3rd row seats, lift the cushion upward and forward to floor cargo position.
6. Remove the hardware securing the seat.
7. On split bench models, lift the center seat upward to clear attachment stud
8. Remove the seat from the vehicle.

1. Installation is the reverse of removal.

Fig. Disconnect the wiring from under the seat

Fig. Seat track mounting hardware locations-typical

Fig. Bench seat components: seat (1), nut (2), stud (3), floor pan (4), bolt (5)-Ram

Fig. Split bench seat assembly-Ram

Fig. Bucket seat mounting components-Durango shown

Testimonial: "Daigrams were exactly what I was looking for....THANKS!"

Jeffrey Turcotte

• 8991 Answers
• Posted on Sep 12, 2010

SOURCE: wiring harness for 2004 dodge

2004 Dodge Ram 2500 Truck Car Radio Wiring Diagram
Car Radio Battery Constant 12v+ Wire: Pink
Car Radio Accessory Switched 12v+ Wire: Brown/Red
Car Radio Ground Wire: Black/Dark Green
Car Radio Illumination Wire: Orange/Dark Blue
Car Stereo Dimmer Wire: N/A
Car Stereo Antenna Trigger Wire: N/A
Car Stereo Amp Trigger Wire: N/A
Car Stereo Amplifier Location: N/A
Car Audio Front Speakers Size: N/A
Car Audio Front Speakers Location: N/A
Left Front Speaker Positive Wire (+): Dark Green
Left Front Speaker Negative Wire (-): Brown/Red
Right Front Speaker Positive Wire (+): Violet
Right Front Speaker Negative Wire (-): Dark Blue/Red
Car Audio Rear Speakers Size: N/A
Car Audio Rear Speakers Location: N/A
Left Rear Speaker Positive Wire (+): Brown/Yellow
Left Rear Speaker Negative Wire (-): Brown/Light Blue
Right Rear Speaker Positive Wire (+): Dark Blue/White
Right Rear Speaker Negative Wire (-): Dark Blue/Orange