Question about 1991 Mercury Cougar

1 Answer

No brake lights 91 mercury cougar

I replaced the brake switch and checked fuses but still no lights

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.


    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

Probably a brake light fuse

Posted on Feb 01, 2013


6 Suggested Answers


6ya staff

  • 2 Answers


Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017



  • 2 Answers

SOURCE: 1999 cougar brake lights not working Fuse+bulbs+switch ok

I am asking you what switch you cheked and how did you know that is ok and working I had the same problem I replaced the switch under the brake pedal and it works fine if you still have this problem write to me @ thank you good luck.

Posted on Feb 06, 2009


Todd Bradshaw

  • 141 Answers

SOURCE: 2000 mercury cougar with a brake problem...please help!!

hello sounds like mastercylinder bad and maybe powerbooster which is behind mastercylinder , next you need the brakes bled please becareful and god bless you and your car.

Posted on Feb 16, 2009


  • 54 Answers

SOURCE: replace disc brakes

The "special service tool" you need is a standard " C " Clamp.

Posted on May 30, 2009


Ronny Bennett Sr.

  • 6927 Answers

SOURCE: 2001 Mercury Cougar turn signal light bulb

3057 bulb

Posted on Jul 09, 2009


  • 14 Answers

SOURCE: i replaced the brake pads on my 1999 mercury

To reset the light, turn the key to position two and have the drivers door open for about 40 seconds, the light should automatically go off.. good luck.

Posted on Mar 29, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Why my dome light an 3rd brake dont work cougar 2002

Burnt bulbs, bad wiring. For the dome, it could be a bad dimmer switch.

Jun 28, 2016 | 2002 Mercury Cougar

1 Answer

How to replace my brakelight switch on my 1987 mercury cougar?

The brake light switch is under the dashboard beside the lever from the brake pedal itself. It is difficult to get to (almost requires that you are either extremely patient or a contortionist) but removes and replaces easily with two bolts and a connector that you unplug from the old one and plug in to the new one. Look under the dash, follow the brake pedal lever upward, and you will see the switch.

May 06, 2015 | 1987 Mercury Cougar

2 Answers

95 cougar stuck in park with no brake lights.already check the fuses replaced brake light switch, will not start from neutral.

Still no brake lights would indicate a bad wire. Check for power at the brake switch, repair the wire, they usually break close to the plug. This will get back the lights and shifter. The no start would be the neutral safety switch on the transmission. Usually the switch is under the shifter cable. Some have a separate switch.

Apr 19, 2015 | 1995 Mercury Cougar

1 Answer

91 mercury cougar dash panel

chec main maxi fuse in engine area--wiring harness mite have issue--or instrument cluster has failed-and they usualy need to be replaced-find magicmechanic online and send him issue-will tell u what to do

May 21, 2012 | 1989 Mercury Cougar

3 Answers

No work light brakes


Feb 08, 2011 | 1999 Mercury Cougar

1 Answer

94 cougar stuck in park and no brake lights

some of these had a switch on the brake master cylinder that will short out and blow the brake fuse. unplug that switch , and check the fuse, replace it if its blown. (brake lamp fuse) the switch is used for the cruise control.

Dec 03, 2010 | 1994 Mercury Cougar

1 Answer

1999 Mercury Cougar 2.5L initially blower motor died, hazard lights stopped working, ran great, but now will not shift out of park.

this sounds like you should be keeping up with checking fuses with a test light on both sides of the fuse,the inter lock solenoid on the shift cable is not powering up,check your brake switch.

Dec 29, 2009 | 1999 Mercury Cougar

2 Answers

Headlights work but dash lights and parking lights are dead

dash and tail sre tied together, so chk tail light fuse.

May 13, 2009 | 1989 Mercury Grand Marquis

2 Answers

Brake lights not working

There is a Relay under the Hood in the Fuse Relay Box. Replace this and it should be OK. If not let me know so that we can look elsewhere for the Problem. Please Rate my Solution, I need all the Help that I can Get!

Jan 26, 2009 | 1999 Mercury Cougar

Not finding what you are looking for?
1991 Mercury Cougar Logo

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

gerry bissi

Level 3 Expert

4388 Answers


Level 3 Expert

85223 Answers


Level 3 Expert

5692 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides