SOURCE: where is the cam sensor on a 2005 dodge neon sxt
Camshaft Position Sensor-On top of engine
Operation
The Engine Management System (EMS) uses the camshaft position sensor to manage sequential fuel injection and as part of misfire diagnosis. The EMS constantly monitors the number of pulses on the signal circuit. The EMS compares the number of camshaft sensor reference pulses and the number of crankshaft position sensor reference pulses received. If the EMS receives an incorrect number of pulses, Diagnostic Trouble Codes (DTCs) should be stored in the EMS. Some engine management systems will then default to multi-port or "gang-fire" injector operation. The camshaft position sensor signal is required to sequence the injector operation to the proper cylinder timing. If the camshaft position sensor or circuit is faulty, most engines will start. However, the EMS misfire diagnostic will likely be affected.
The following symptoms can be caused by an intermittent wiring connections or faulty signal to the EMS.
Related Symptoms
SOURCE: 2005 dodge neon sxt how many motor mounts
Hi I'm litoshop on your vehicle you have 5 mounts front left side, front right side, lower strut rear of engine,upper strut right side and transaxle rear left side good luck if this information has been helpful please let use know thank you
SOURCE: I own a 2005 Dodge neon SXT. Once in awhile a
The red circle means there is an intermittent problem with your vehicle security.If your car starts and runs fine it would be hard to diagnose until it wont start at all.
530 views
Usually answered in minutes!
×