Need torque spec for front wheel for awd 2003 chevy silverado ss

o replace the front passenger CV axle on a 2001 Chevy Venture, you'll need a set of basic tools. Here's a list of tools you might require for this job:

1. Jack and Jack Stands:
   • Used to lift the vehicle safely and provide support during the repair.
2. Wheel Chocks:
   • Ensures that the vehicle stays in place while lifting one end.
3. Lug Wrench:
   • To loosen and remove the lug nuts securing the wheel.
4. Socket Set and Wrenches:
   • Various sizes to remove bolts and nuts securing the CV axle.
5. Pry Bar or Crowbar:
   • Helps in removing components like the wheel hub.
6. Pliers:
   • Used to remove cotter pins and other small components.
7. Hammer:
   • May be needed to tap or gently persuade parts loose.
8. Torque Wrench:
   • Necessary for tightening nuts and bolts to the manufacturer's specifications.
9. Pry Tool or Flathead Screwdriver:
   • Useful for prying apart certain components.
10. Hub Puller (Optional):
    • Sometimes required to remove the wheel hub from the CV axle.
11. CV Joint Clamp Pliers:
    • If your CV axle is secured with clamps, you'll need pliers designed for CV joint clamps.
12. Catch Pan:
    • To catch any transmission fluid that may leak during the process.
13. New CV Axle:
    • Ensure you have the correct replacement part for your specific vehicle.
14. Wheel Bearing Grease:
    • Used to lubricate the CV joint and ensure smooth operation.
15. Service Manual:
    • A repair manual specific to your vehicle can provide step-by-step instructions and torque specifications.

Always follow safety precautions and consult your vehicle's service manual for specific instructions related to your Chevy Venture. If you're not comfortable with the repair process, it's advisable to seek professional assistance.

All the torque specs can be found using Google. Just change the words in the search query and press Enter.

Wheel hub

https://www.google.com/search?q=2003+Chevy+Suburban+Z71+wheel+hub+torque+specs

Or get a copy of the Repair Manual for $16

https://www.google.com/search?q=2003+chevy+suburban+z71+repair+manual

..

• Axle Shaft nut - 177 ft-lb
• Hub and bearing assembly to steering knuckle bolts - 133 ft-lb

2003 chevy silverado 1500 4.3 v6. Changing steering rack and

https://www.justanswer.com > ... > Chevrolet Repair
Jan 11, 2021 - Below are the torque specs you requested: Steering Rack-to-frame mounting bolts: 136 lb. ft. Outer tie rod nut: 37 lb. ft. Outer tie rod ...
1 answer · 1 vote: Coupler clamp bolt to the intermediate shaft: 33 ft. lb.

• 
  

  Torque specs for tie rod end castle nuts - JustAnswer

  https://www.justanswer.com > chevy > 2p3g8-torque-sp...
  Oct 24, 2009 - Tighten the clamp nuts 18 ft. lbs. (25 Nm) (except C3HD). On C3HD models, tighten the clamp nuts to 65 ft. lbs. (88 Nm.

People also ask

The one that fits!

That's not the way it works. you buy a socket set. It has one set of AF Sockets and one set of Metric sockets. The one you use is the one that fits.

Hub and Wheel Bearing Torque Specifications - DRiV

drivcat.com > HubWheelTorqueTableWindow

2009 Ford Fusion ... Front Proc 1 Note ... Front Proc 2 Note ... Do not attempt to tighten the nut with the vehicle on the ground or the wheel bearing will be ...

Front Axle Nut Torque Spec - Lounge - Fusion Energi - Ford ...

www.fordfusionenergiforum.com > topic > 6160-front-...

Dec. 2, 2019 - Im replacing the front wheel bearing assemble this weekend and cant find the torque spec for the ale nut. The older model Fusion (up to 2012) ...

BHA54317 Axle / Spindle Nut Torque Specification - 1A Auto

docs.1aauto.com > BHA54317 Torque Spec

PDF Vehicle Notes. Lb. ft NM. Ford. Fusion. 2006-12 (Excluding All Wheel Drive Models). Rear. Lincoln. MKZ. 2007-12 (Excluding All Wheel Drive Models). Rear.

SKF-Front-Rear-Axle-Nut-Hub-Mount-Lug-Nut-Torque-Spec

dannysengineportal.com > wp-content > uploads > S...
PDF
Front & rear axle nut, hub mount and lug nut torque specifications for FWD ... 3 Series AWD E92, E93 ....2012-2013 . ... FORD / MERCURY TRUCKS - cont.


..

Not sure about your model, but in general they are usually around 180 ft./lbs.

Here are the front axle nut torque specs for the 2004 Chevy Silverado 2500HD:
• Axle Shaft nut - 177 ft-lb
• hub and bearing assembly to steering knuckle bolts - 133 ft-lb

The torque specs.are for 15k series trucks is 155 ft.lbs.For 25/35 series it`s 133 ft.lbs.Hope this helps.Good luck.

Being a ss, sounds like your AWD transfer case if it was never serviced may be worn out and will need to be replaced. The other area that would cause the same issues you have described would be a bad CV join or U joint.

Start with the simple and inspect your CV and U joints. If all seem to be in 100% working order, then move on to inspecting your transfer case and front differential.

Thank you for using fixya and be safe.

the center bolt for cv axle!103ft-lbs,hub bearing assembly bolts!77ft-lbs

THE LUG NUT TORQUE SPEC - 140FT/LBS\
CALIPER MOUNT - 80FT/LBS
CALIPER BRACKET 129FT/LBS
AXLE NUT 177FT/LBS