Question about 1995 GMC Sierra C1500

1 Answer

Brake lights and tail lights don't work

Replaced tail light bulbs. Evertything was working fine. Now neither the tail lights nor the brake lights don't work.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 2 Answers

Cheek you brake light switch it's under the dash.. if it goes out it kills brake and tail

Posted on Feb 23, 2013

Ad

6 Suggested Answers

Anonymous

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
jmgldsmth

Jim Goldsmith

  • 2005 Answers

SOURCE: brake lights on GMC truck do not work replaced fuses & bulbs

ther is a switch called a brake lifgt switch that has a pin that is moved by your boot brake pedal arm.
the way it works is: when you press on the brake the brake pedal moves down and the spring in the switch pushes out closing the contacts to your brake lights the switch is located high up under the driver's side of the underside of the dash near or, on the brake pedal support replace or, adjust this switch

Posted on Apr 24, 2009

Anonymous

  • 1985 Answers

SOURCE: brake lights won't work. tail lights do. I

need to know if your third brake light up high is working or not.if it isn't,you need to check the brake light switch on the brake pedal with a test light,one side hot all the time,the other side should turn hot when brake pedal is pushed.

Posted on Jan 19, 2010

Marc Podeszek

  • 840 Answers

SOURCE: 2003 gmc envoy xl brake lights dont work

sounds like a fuse look under the dash panel for fuse cover look at the back of cover and check that fuseThanks for using fix ya Please rate my response thank you very much

Posted on Jan 31, 2009

Anonymous

  • 3 Answers

SOURCE: 2003 gmc envoy xl brake lights dont work

theres usually a pressure switch behind the brake pedal, sometimes the plastic hex nut rattles loose and you have to retighten it.

Posted on Apr 12, 2009

dennymulford

Dennis Mulford

  • 1055 Answers

SOURCE: No brake lights, or no signal lights

brake lights and turn signals work off the same curcit, it could be the fuse or the brake light switch !!!!!!

Posted on Jun 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Turn signals not working


Suspect the multi-function switch. (turnsignal) these fail a lot.

Jan 01, 2018 | Ford E-150 Cars & Trucks

1 Answer

My tail lights work but my brakes lights don't


You actually have two different circuits, one for each.
The bulbs should have two filaments inside.
Depending on the make model and year, you should have a fuse and the brake switch, plus the circuit goes thru the turn signal switch.

Feb 15, 2013 | Cars & Trucks

1 Answer

My brake lights work but my tail lights and reverse lights don't work. Also my dash lights quit when I changed the switch for my headlights.


Check your fuses. I had the same problem with a 90 Honda civic. Dash lights went out, tail lights also went out. Replaced 1 fuse and all came back on.

Jan 11, 2013 | 1996 Dodge Neon

1 Answer

1997 Subaru Impreza Tail lights work but brake lights don't even though the Hatch brake light is working


Hi,
So, both sides are not working? Check for voltage @ the brake light bulb to see if you're getting power. Also, look in the fuses.

check out the online Subaru forums, too.

GL,
Td

Oct 03, 2012 | 1990 Subaru Legacy

1 Answer

1996 chevrolet 1500 brake light and blinkers dont work


a bad turn signal switch the brake lights go threw the turn signal switch

Aug 26, 2012 | 1996 Chevrolet C1500

1 Answer

Brake lights and rear deck light do not work on 1991 Lexus ls400. I checked all fuses,bulbs, and Brake switch and they are fine. Help?


Have you probed the tail/brake lamp socket to see if power is there or you just assume it is? also make sure the ground is good for the brake lights Do that if not done already and let me know.

Jun 22, 2012 | 1991 Lexus LS 400

1 Answer

Tail light don't work on my Honda accord Ls 1997


check the brake light switch, it is located at the brake pedal... or check/replace bulbs.... check connector, sockets in the tail light assy...

Jun 04, 2011 | 1997 Honda Accord

1 Answer

Tail lights only work while pressure is being made on the brake pedal, lights work fine otherwise, I assume this is a Vaccum leak somewhere, any idea where i can find the line?


If tail ights only work while putting o nthe brakes, that means the bulbs need replaced.

Those bulbs have two elements in them,,,1 for brake lights , 1 for tail ights.

Repalce the bulbs and all will be fine.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/sean_54c3a3dc48a7773c

Nov 16, 2009 | 1988 Ford Crown Victoria

2 Answers

Right brake light out; tail light works fine


most rear tail lights and turn/stop lights are the same dual filiment bulb. it is possible for your tail light to work and your brake light not to and still have a bad bulb. I would check the bulb first, your brake light works on the left yes? this would mean that the fuse is fine

Mar 31, 2009 | 2006 Dodge Stratus

Not finding what you are looking for?
1995 GMC Sierra C1500 Logo

477 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...