Spark plug firing order for corsa lite 1.4 - 2004 Opel Corsa 1.3

1,3,4,2, is firing order (is clue 1)
and using (no engine told gee) a quad or dual pack wasted spark coils, they fire 2 at once.
1 and 4 fire
then 3 in 2 files, at same time.
this tech is seen back to 1974 , save money for not having 2 more coils as seen all every new car now. called 4 COP coils;
the ecu cuts fuel if spark fails on all EFI made. (ASE class day2)
the causes are simple. in order of common.
1: the HV wire is bad, for sure carbon or the silicon jello junk wire core sets, pure OEM trash, I only use NGK MAG wires, or BOSCH MAG.
IF, 1 of the 2 spark plugs 1&4 are fouled so bad that act open, fails.
or 21 year old the spark gap is larger than hat rim, bad.
tech1 to tech 2, gee bob ,I can throw my hat thought that gap.
or coil pack bad. well try new plugs first the HV set wires.
or some dweeb swapped coil packs not doing 1 wire at a time
and mixed UP 1 from 3 wire, OOPS !.


the 2 paired spark plugs are wired in series
if one shorts the other works.
if one opens both go dead. Plugs or wires or driven coil)
just like old skool Christmas lites did for decades.

Hi there bring 1 and 4 cylinder to TDC no 1 cyl should be on a firing stroke 4 will be compression stroke make sure cam and crank timing has been set in order, firing order will present on a cross formation around distributor top housing seat ,with rotor in line with one of the 4 cross formation points no 1 should begin from this point with rotation of engine following in order of 1-3-4-2 which is firing order.

Hi maybe check if there isnt a vacuum pipe off or damaged near the intake manifold

theres no distributor and the firing order for your 3.8 is 1-6-5-4-3-2-the following link shows the coil pack
Buick General Motor 3800 V6 Engine Firing Order DIS IDI ignition timing 3.8 Buick Engine Coil Pack Firing Order Spark Plug Wire Location Which way do the spark plug wires go on & what cylinder is what?
.
For the Buick V6 231 3.8 liter turbocharged engine:
.
Answers!
.
Firing order:
1 - 6 - 5 - 4 - 3 - 2.
.
Spark plug wire location on coil pack:
.
Closest to the back of the car, left to right: 1 - 5 - 3.
Closest to the front of the car, left to right: 4 - 2 - 6.
.
Spark plug wire location on engine:
.
drivers side, front to back of car: 1 - 3 - 5.
passenger side, front to back of car: 2 - 4 - 6.
.----and this link shows the coil pack to cylinders
.
3 8 Buick Turbo Engine Coil Pack Firing Order Spark Plug Wire Location

have the fuel checked for water or a blockage , injecters also mite need cleaning !

For spark plug problem,click the help links provided below :---Car has no spark? http://schematicsdiagram.blogspot.com/2011/06/car-has-no-spark.html
------------How to Replace Spark Plugs? http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-spark-plugs.html
-------------Car cranks, has spark but will not start?

http://howtobyme.blogspot.com/2011/12/car-crankshas-spark-but-will-not-start.html

------------------------
The spark plug firing order for car? http://schematicsdiagram.blogspot.com/2011/06/spark-plug-firing-order-for-car.html
----------How to gap spark plug ? http://technoanswers.blogspot.in/2012/02/how-to-gap-spark-plug-on-chevy-impala.html----------- Spark plug Replacing for? http://technoanswers.blogspot.in/2012/02/spark-plug-replacing-for-chevy-impala.html
-----------How to identify number one spark plug on the distributor cap? http://schematicsdiagram.blogspot.com/2011/12/how-to-identify-number-one-spark-plug.html
---------How does the spark plug wire go on the distributor cap? http://schematicsdiagram.blogspot.com/2011/12/how-does-spark-plug-wires-go-on.html
---------Spark plug Firing Order Diagram? http://schematicsdiagram.blogspot.com/2011/12/2006-suzuki-forenza-spark-plug-firing.html
-----------This will help.Thanks.

1.8L (LNK)Firing Order
1-3-4-2

Spark Plug Torque
18 N·m
13 lb ft

Spark Plug Gap
1.0-1.3 mm
0.040-0.051 in

Spark Plug Type
SK20R11 DENSO

1.8L (LV6)
Firing Order
1-3-4-2

Spark Plug Torque
25 N·m
18 lb ft

Spark Plug Gap
1.0-1.2 mm
0.040-0.048 in

Spark Plug Type
SR16R11 DENSO
Thank you and enjoy,
Lee

The spark plug firing order for your 1993 Oldsmobile Cutless is:

Firing order 1-2-3-4-5-6 --- ----- ' 1 '' 2 1 ' front ' 4 '' ' --- ' ' --- ' ' of ' 6 '' ' ' 3 '' 4 3 ' --- ' ' vehicle --- ' ' ' 2 '' ' ' 5 '' 6 5 ' --- -----distributorless ignition

Okay, on the photos I am posting, pick the size of motor that you have....since you didn't post it. When you find the right photo of your motor, the numbers on the engine correspond to the number of the spark plug that goes to the coil...1 to 1, 2 to 2 and so on. This is your firing order and will ensure you have the proper spark plug firing from the correct point:



1FZ-FE engine Firing order: 1–5–3–6–2–4Distributor rotation: counterclockwise



5VZ-FE engine Firing order: 1–2–3–4–5–6Distributorless ignition system



2RZ-FE and 3RZ-FE engines Firing order: 1–3–4–2Distributor rotation: clockwise



2RZ-FE and 3RZ-FE engines Firing orders: 1–3–4–2Distributorless ignition system



2UZ-FE engines Firing order: 1–8–4–3–6–5–7–2Distributorless ignition system

2003 Chevrolet Malibu 3.1L SFI OHV 6cyl
Spark Plug Wires - Removal & Installation

3.5L Engine

1. Before servicing the vehicle, refer to the Precautions Section.
   NOTE Twist the spark plug boot one-half turn in order to release the boot. Pull on the spark plug boot only. Do not pull on the spark plug wire or the wire could be damaged.
2. Remove the intake manifold cover, if required.
3. Disconnect the left side spark plug wires from the spark plugs.
4. Disconnect the left side spark plug wires from the ignition coil.
5. Remove the spark plug wire clips from the Manifold Absolute Pressure (MAP) sensor bracket and the heater inlet and outlet pipe tab.
6. Remove the spark plug wire assembly.
7. If replacing only one plug wire, open the retaining clips and remove the appropriate spark plug wire.
8. Disconnect the right side spark plug wires from the spark plugs.
9. Disconnect the right side spark plugs from the ignition coils.
10. Remove the spark plug wire assembly.
11. If replacing only one plug wire, open the retaining clip and remove the appropriate spark plug wire.

To install:

1. Install the spark plug wire assembly.
2. Connect the right side spark plugs to the ignition coils.
3. Connect the right side spark plug wires to the spark plugs.
4. If replacing only one plug wire, open the retaining clip and install the appropriate spark plug wire.
5. Install the spark plug wire assembly.
6. Connect the left side spark plug wires to the spark plugs.
7. Connect the left side spark plug wires to the ignition coil.
8. Install the spark plug wire clips to the MAP sensor bracket and the heater inlet and outlet pipe tab.
9. If replacing only one plug wire, open the retaining clips and install the appropriate spark plug wire.
10. Install the intake manifold cover, if required.

Fig. 2.2L Engine Firing Order: 1-3-4-2 Distributorless ignition system



Fig. 3.1L Engine Firing order: 1-2-3-4-5-6 Distributorless ignition system



Fig. 3.5L Engine Firing order: 1-2-3-4-5-6 Distributorless ignition system



Fig. 2.4L Engine Firing order: 1-3-4-2 Distributorless ignition system



Fig. 3.1L Engine Firing order: 1-2-3-4-5-6 Distributorless ignition system



Fig. 2.2L Engine Firing Order: 1-3-4-2 Distributorless ignition system


Fig. 3.5L & 3.9L Engines Firing order: 1-2-3-4-5-6 Distributorless ignition system


I really hope help you with this (remember rated this help) Good luck.