Question about 1995 GMC Sierra C1500
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: 1998 gmc sierra brake lights
did u check that they not burn?if not you should Check the wires going into the steering column if you don't have separate turn signal lights and brake lights because if they use the same bulb then the turn signal may be bad. If I remember correctly that particular car doesn't work this way, but I include it just in case.
Posted on Jun 29, 2008
yes , i have a 96 mine done the same thing , i was removing the dash cover to install a radio accidently broke mine , i had to push down on what remained and wedged a sheetrock screw to hold it in place till i could get a new one
Posted on Dec 19, 2008
I had similar problem with my 97 sierra... I only lost 1 light, then brake lights stayed on all the time... turns out the "t" connector for the trailer harness under rear bumper was rotted inside...unplugged the 2 parts of the harness and pluged them into each other with out the "T" harness.... everything works great... Hope it helps ya
Posted on Feb 27, 2009
need to know if your third brake light up high is working or not.if it isn't,you need to check the brake light switch on the brake pedal with a test light,one side hot all the time,the other side should turn hot when brake pedal is pushed.
Posted on Jan 19, 2010
Tips for a great answer:
Nov 19, 2015 | Chevrolet Silverado 1500 Cars & Trucks
Jun 03, 2015 | GMC Cars & Trucks
May 11, 2015 | 2003 GMC Sierra
Jan 20, 2013 | 1993 GMC Sierra
Sep 22, 2011 | 1994 GMC Sierra
Jan 24, 2010 | 1995 GMC Sierra C1500
Jan 01, 2009 | 1996 GMC Sierra
Aug 12, 2014 | 1995 GMC Sierra C1500
50 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: