I have chevlet lumina model 2000. few day back i changed my battary after that the radio is asking for code. i have 2 code nos but when i put the code he did't accepted. the code is: 4336 & 5115 both he did't accepted. please solve my prob..
When you disconnect your battery and then reconnect it again, it disables the radio. This is an anti-theft protection for your car radio.
The enable your radio the activation code is in your vehicle owner's manual. If you do not have this code you need to go to your Chevrolet service centre and get them to enter this code for you.
SOURCE: car radio
ignition on, LOC appears
press MN and OOO will appear in display
press MN again to make the the last two digits agree with your code.
press HR to make the first one or two digits agree
with your code.
Press AM/FM after you have confirmed that the code matches the code you have written down.
The display should show SEC which indicates
the radio is now operable and secure.
'rock on'
SOURCE: 1998 Chevy Lumina radio
Unlocking the system from the manual.
1. Turn on ignition. LOC will appear.
2. Press MN and '000' will appear.
3. Press MN again and hold until you see the last 2 digits of your code.
4. Press and hold HR until you see the first 1 or 2 digits of your code.
5. Press AM FM after you make sure the code is correct. SEC should appear, meaning your system is ready and still secure. If LOC appears, the code was wrong. Good luck
SOURCE: put new battary on my 1999 chevy tahoe. and i
The code might be in your owners manual. If not you will have to contact the dealer/manufacturer. Also, sometimes they have another seperate paper with this info on it.
SOURCE: Need a code for Lumina 2000 car stereo Serial no.
there are many different ways to unlock the radio by the code that is set in these. here is a list of websites were you can read then try to unlock yours
http://www.webcrawler.com/info.wbcrwl.302/web/free%20radio%20unlock%20codes
If you have the security code it's easy. The code is something that either you or a previous owner entered. If you don't have the security code a trip to the dealer will be in your future.
Unlocking the Theft-Deterrent Feature After a Power Loss
Enter the code as follows; pause no more than 15 seconds between steps.
Entering the incorrect code eight times will cause INOP to appear on the display. Wait an hour with the ignition in the ON position before you try again. When you try again, you will have three more chances (eight tries per chance) to enter the correct code before INOP appears.
Deactivating the Theft-Deterrent Feature
Enter the code as follows; pause no more than 15 seconds between steps.
Entering the incorrect code will cause SEC to appear on the display. The radio will remain secured until the correct code is entered.
545 views
Usually answered in minutes!
×