2002 Nissan Frontier Crew Cab Logo

Related Topics:

herbschramm Posted on Jan 20, 2018

2002 nissan frontier wouldn't shift into 3rd or 4th

I have a 2002 Nissan frontier and i was driving down the road and i wouldn't shift into 4th from 3rd. i pulled over and tried it again and same thing. i pulled over and disconnected the battery cable and tried it again. now it wont go into 3rd. it tries but i seams to go from 2nd to neutral.

3 Related Answers

Anonymous

  • 407 Answers
  • Posted on May 07, 2009

SOURCE: 1994 nissan quest transmission shift into 1st and 3rd only

possiable tps sensor

Ad

Anonymous

  • 88 Answers
  • Posted on May 24, 2009

SOURCE: 1994 nissan sentra shifting hard

change fluid in trans add lucas for trannys let me know if theres metal in the pan or if you have trouble tell fixya bout me ok

Anonymous

  • 720 Answers
  • Posted on May 02, 2010

SOURCE: Nissan primera, engine management light

Hi Kev,

Your Nissan Primera has an on-board diagnostic computer which can detect malfunctions in either engine or transmission.

When the Engine Management light remains lit, this means some faults are present and need investigating.

From what you've described, one of the issues is indeed related to the transmission, but you will need to have the trouble codes (DTC's) extracted from your vehicle's computer, in order to determine what requires repair.

Whenever power is disconnected (i.e. the battery) and re-connected, this resets your vehicle's computer momentarily, until such time as it detects the fault again.

Recommend you either have your local dealer extract the codes (for a small 15min labor fee), or learn to extract the codes yourself, using a suitable jumper wire.


"If this has helped you in any way, please rate this solution"

Regards,

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

I have a 1999 Nissan frontier 2.4 5 speed transmission it will only go in first and second gear will not go into 3rd 4th or 5th or reverse clutch seems fine what's the problem

Hello. It seems the 'shift fork' is either 'misaligned' and/or 'bent' in 3rd, 4th, 5th and REVERSE. It's, also, possible those gears are 'stripped' on their shaft(s); making driving that truck, in those gears, impossible. Good luck and keep me informed; if you want to.
0helpful
1answer

01 Nissan frontier, 3.3l won't shift into 3rd or 4th

Hi there's this website something like reliable-store and it is very amazing for manual for repairing servicing anything
someone on fixya recommen ded it to me and I thank him even today
They have full manuals and it's verrrrry cheap
0helpful
1answer

What is the ignition timing for 2002 nissan hardbody 2000i 16v

Here are the 3 engines listed for this year. IGNITION TIMING

2002 Nissan/Datsun Truck Frontier Pickup 2WD 2.4L SFI 4cyl

The Ignition Timing

18-22 DegreesBefore top dead center - When throttle positionsensor disconnected and using suitably programmedscan tool.When adjusting idle speed, set parking brake & chock drive wheels, curb idle speed (750-850 RPM)transmission in neutral.

IGNITION TIMING

2002 Nissan/Datsun Truck Frontier Pickup 2WD 3.3L SFI 6cyl

The Ignition Timing

8-12 DegreesBefore top dead center - throttle position sensorharness disconnected.When adjusting idle speed, set parking brake & chock drive wheels, curb idle speed (700-800 RPM)transmission in neutral.

IGNITION TIMING

2002 Nissan/Datsun Truck Frontier Pickup 2WD 3.3L SFI SC 6cyl

The Ignition Timing

8-12 DegreesBefore top dead center - throttle position sensorharness disconnected.When adjusting idle speed, set parking brake & chockdrive wheels, curb idle speed (700-800 RPM)transmission in neutral.
0helpful
1answer

Have a 2002 nissan frontier xe grind in front end shop said the wheel bearing are ok what could be causeing this grind does not do it all the time can drive a couple miles hit a bump some time it will do...

It may be rust or dirt accumulating between the rotor and rotor shield. Check for this and remove any rust and scale present also check disc brake pads at the same time these can sometimes make a grinding noise.
Hope this helps
Bob
1helpful
1answer

No 5th gear or reverse

I have a 1998 Nissan Frontier, 2wd. I was driving back from lunch one day, and the 5th gear stopped working. Then the next day, the reverse stopped working. It switches into 1st, 2nd, 3rd, and 4th just fine. Please help. What do you think it could be. I have no money to take it to the shop
0helpful
2answers

Why won't a 1995 nissan pathfinder shift into third gear

Does it stay in second or does it make the shift and go to neutral or first?
0helpful
1answer

I can't shift into reverse. All other 5 gears are

My VW is not shifting into reverse at all; I think a certain person was driving and mistakenly pressed the gear shifter down for all gears--reverse is the only gear you press the shifter down first in. Doesn't grind, 1 2 3 and 4 work but no reverse no reverse lights.
I've read several complicated (can't see scenario's) posts on screens and linkage and a cable fixed one guys problem but still no solutions.
0helpful
2answers

Nissan Sentra jerks in 3rd and 4th

have you ever done trans flush??/powerflush??it will flush EVERYTHING. dump and fill only get's so much. how is the fluid in the trans??is the check engine light on??
Not finding what you are looking for?

392 views

Ask a Question

Usually answered in minutes!

Top Nissan Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...