At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Clutch needs replacement, haven't you smelled a weird smell lately? That would have been the clutch plate over heating and burning, hence the words,..Burned out clutch
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Check there is free play at the clutch slave cylinder , if the cv joint or drive shaft is broken it should make a noise when in gear with clutch engaged .
Hello, you may have more success in the proper category of lawn or farm stuff. Fortunately I have same Tractor. Sounds like clutch fork is not moving clutch the same way each time you press clutch. Could be clutch needs play removed. Sometimes there is a pivot ball for the clutch fork to rest on. When the pivot ball is worn the clutch fork can rock. Also remember RPM to give gears time to stop spinning before changing gears.
The gear box should be okay. Check the clutch-watch if the clutch fork on the bell housing moves when someone presses the clutch. If it doesn't move, the cable needs adjusting, or if hydraulic clutch diagnose the clutch master and slave cylinders. Either one should cause the clutch fork to move and engage the clutch.
It sounds like your clutch cable has snapped, thats what the thing spinning is. that should be attached to the gear box to allow the gears to move in and out, how does the clutch pedal feel?
it wont engage if your low on refrigerant you can bypass the low pressure switch located on or near the receiver dryer it has 2 wires plugged into it take a paper clip and bypass the 2 in the boot and it will run long enough to re charge it.
if it wont drive how do you kno its engaging if it is in gear and you arent pushing in the clutch it should move forward if it doesnt move then you will have to replace the clutch
×