02 jeep grand cherokee check engine light on. have changed ingition coil, spark plugs, cam senor, crank senor, throttle body senor. nothing works. jeep is still misfiring after driving 8 to 10 miles. HELP
I have replaced the above items along with a new starter. The last items installed were the coil pack and spark plugs now it won't start at all. Before it was sluggish, would randomly shut off while driving, and the service engine light would flash when reaching speed of 65mph.
1,592 views
Usually answered in minutes!
The codes are P1391 and 0352
the codes are P1391 and 0352
I know that code P1391 is crank sensor and that has been changed along with cam sensor, throttle body sensor, iginition coil, spark plugs and I don't know what else to do. Also got code 0352. Any help???
what is the problem code
what is the code?
did you every figure it our or get it fixed. i just replaced my computer , plus everything you have and mines still misfires
I have a 2002 grand jeep Cherokee that won't start after driving it for awhile you have to let it sit for awhile for it to start again
misfires
Runs rough, misfiring - changed spark plugs recently but there is not a fuel leak. The fuel gauge is accurate.
×