Question about Honda CR-V
The power windows stopped working on 1997crv first passenger side then rear driver then rear passenger the driver side still woks tried new motors still dont work is it bad switches
Do you have power at the switches?
If you have power at the switches and not at the motor, then check the wire, or bad connection.
Make sure fuses are OK.
Posted on Mar 14, 2013
Most likely the switch got wet. unplug and check conections
Posted on Mar 14, 2013
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
If you have already replaced the passenger side switch and it still doesnt work its a good chance that there is a pinched wire in the door itself. However usually it wont work from the drivers side either. But I still suggest looking there first.
Posted on Dec 12, 2008
the switches need cleaning ,they have contacts in them that get dirty you can spray contact cleaner on them or use emery paper to file them, they are not to hard to pull apart
Posted on Jan 16, 2009
I know its not what anyone would want to here but sounds like a short. Best thing to do is first wiggle your key switch when the vehicle in in the on position then at the same time try to check to see if locks or windows are working. Then do the same in while the rig is running. If that dont work your ignition is fine and you need to take off door panels and check and wiggle all conections on window motors and lock motors and look for melted or burt wire or some that might have got hot. If all is good there you need to go to the back of the fuse box were the fuses to those items plug in and check there. As far as the service engine light goes either take it to the nearest Schucks or AutoZone and they will check it for free if not cycle the key on and off 3 times and on the 3rd time leave it in the on position look at your odometer light and it will flash a code remember that code and type Dodge then the code on yahoo search and it should tell you why your light is on Hintz whay sensor is bad. Hope this helps.
Posted on Apr 05, 2009
the drivers door switch is most likely bad, they get used the most and wear out first, the connector on the back of switch may have come loose and not making good electrical contact, remove switch and check connector and if still not working need new switch, the windows are all on same circuit and either all work or none work so not fuse. extremely rare is a short in wired but not likely.
Posted on Aug 18, 2009
i have a 2000 silverado and the windows usally go down fine. but when i roll them up i have to hit the button repeatally to get them to go up. this ison both windows. any suggestions
Posted on Aug 20, 2009
Tips for a great answer:
Aug 24, 2018 | Honda Cars & Trucks
Jun 23, 2015 | Cars & Trucks
Nov 21, 2013 | 2006 Mazda 3
Sep 04, 2017 | 2007 Honda CR-V
Mar 15, 2011 | 2005 Ford F-150
Jul 22, 2017 | 1985 Pontiac Parisienne
Apr 19, 2010 | 1996 GMC Jimmy
Mar 17, 2010 | Chevrolet Cavalier Cars & Trucks
298 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: