Have been changing wheel bearings fer three days now never had this issue before but the bearings keep going out
SOURCE: wheel bearings on 2005 HD 2500
I just came across your posting, If you're still having this issue, it may be due to the offset of your wheels. Too much offset can cause excessive load on the outboard bearings. If you have wheels that move the centerline of the wheel too far outboard of the bearing, then you will generally be putting too much stress on the bearing/hub assembly. as you know your vehicle has a unitized bearing assembly. If the bearing is being overloaded on the outer edge by too much offset it will fail over time. hope this helps
SOURCE: 2003 impala, abs code c0216
I have had no luck finding ABS codes, I will keep searching with different search engines.
SOURCE: noisy front wheel bearing
Yes the bearings can be changed on this truck. The bearing races will need to be removed from the rotor to do this use a punch and hammer once the rotor is removed. You will need inner bearing and race, outer bearing and race, and a seal, plus grease to pack the bearings. The hub on these trucks is the rotor. Please rate.
SOURCE: wheel bearing change for 98 malibu
you have too change the whole assembly
pull the wheel pull the callipilar pull the callipliar mount pull the rotor pull the half shaft nut then take the three bolts out of the hub assembly and pull it less than hour job !!!!
100 views
Usually answered in minutes!
×