Where is p0155 for mercury sable located

SOURCE: got a code 1742 on my sons mercury sable

Okay this is a internal problem in the transmission you will need to remove side cover and oil pan of the transmission.This is a big job to do it safely you will need a hoist and engine cradel this a profesional job my advice to you unless you have done this before 2 or 3 times take it in for service this is a delicate job mistakes can resault in costly mancanical further repairs.Hope this helps,John

Testimonial: "seems like it should not be as hard as you say "

SOURCE: Where is the starter located on a 1993 mercury sable engine

trace the big cable that came from the positive terminal of your battery. at it's end is the starter.

or if it passes trough a big relay, then there is another big cable from that relay that would go down to the side of the engine, either left or right, that would be the starter.

tnx 4 using fixya,

drcool

Marvin

• 85242 Answers
• Posted on Nov 12, 2008

SOURCE: DPFE Sensor with codes PO401 And PO402

The DPFE is located near the EGR valve, it has 2 very thick silicone rubber hoses connected to it that come off the exhaust. It is rectangular and about 1/2 the size of a pack of smokes

SOURCE: need wiring diagram for radio on 96 mercury sable

http://www.the12volt.com/installbay/stereodetail/1500.html

SOURCE: mercury sable 2001 duratec engine DOHC I get check engine light and diagnostic code PO401". Any suggestions?

Barring any vacuum leaks, P0401 is indicative of a bad EGR valve. Hope this answers your question. Best of luck.
Greg