Question about 2008 Dodge Ram Pickup 1500
You should not be giving out advice when you clearly have no idea what you are talking about. All dodge Chrysler Jeep products have automatic relearn on the TPMS system. Solid light means low tire pressure flashing light means one or more sensors are not working correctly or you just have installed new sensor on the vehicle and it needs to be relearned. On these make vehicles all you do is drive the vehicle up to 15 mins but usually will go out within 2 minutes
Posted on Aug 01, 2018
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
With the factory air pressure monitoring system of the dodge vehicles the light should automatically reset when the tire is reinflated to the proper pressure. If the light remains on after adjusting the air pressure then the problem lies at one of the individual sensors located at the valve stems on the rims
Posted on Mar 08, 2010
Shouldn't really be necessary to do anything to reset it if the system is operating properly.
"The system will automatically update and the TPM warning lamp will extinguish once the updated tire pressures have been received. The vehicle may need to be driven for up to 10 minutes above 15 mph (25 km/h) to receive this information."
"A system fault can occur by any of the following scenarios:
1) Jamming due to electronic devices or driving next to facilities emitting the same Radio Frequencies as the TPM sensors.
2) Installing some form of aftermarket window tinting that affects radio wave signals.
3) Lots of snow or ice around the wheels or wheel housings.
4) Using tire chains on the vehicle.
5) Using wheels/tires not equipped with TPM sensors."
Also, if you have the premium TPM system, the spare tire being low could trigger it, or with either the base or premium system, if you have a flat and change to a spare, the original flat tire could keep it from re-setting. And of course, a faulty sensor could be the problem.
There is a re-setting tool, but that should only be needed if the tire positions are changed (like if you rotate your tires), and that's only so that it can accurately tell you which tire is low, as opposed to turning off a warning light.
Good luck and thank you for using Fixya.
Posted on Mar 08, 2010
SOURCE: how do i reset the
This should automatically reset upon proper tire inflation. If you are still getting a low pressure light then the RF chip in the tire is faulty and needs to be replaced. These are rather expensive and can be purchased from dodge.
Posted on Aug 02, 2010
Welcome, If you have driven over a month and it has not reset there is a problom with one of the 4 sensors, You will need to have the TPMS scaned to see witch sensor is not working,, Here is a link explainin this in detail
Posted on Jul 14, 2010
well it depends, if you have just reset the tire pressures, the light should go off by itself, if it doesn't then you have a bad tire pressure sensor. If you have replaced the sensor, it must be programmed into the WCM by the dealership.
Posted on Nov 29, 2009
Tips for a great answer:
May 28, 2018 | Cars & Trucks
May 23, 2016 | Dodge Ram 1500 Cars & Trucks
Oct 17, 2014 | 2008 Dodge Ram Pickup 1500
Jul 21, 2014 | Dodge Ram 2500 Cars & Trucks
Nov 14, 2010 | 2008 Dodge Ram Pickup 2500
Oct 15, 2010 | Dodge Ram 2500 Cars & Trucks
Aug 02, 2010 | Dodge Caliber Cars & Trucks
Mar 08, 2010 | 2006 Dodge Durango
Nov 30, 2009 | 2008 Dodge Ram Pickup 1500
Nov 21, 2009 | Dodge Durango Cars & Trucks
18,591 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: