2000 boxster turns off keyless after 4 days sitting without starting in order to save the battery. No keyless entry and the key will not unlock the driver's door. Just installed a need keyless entry mechanism but still have old key. Key will turn but will not unlock,,cant get into the car period?? help
SOURCE: 01 boxster electrical
HELO FARSHID ITS JP THIS IS A SECURITY AND LOCKING MODULE THAT IS DEFECTIVE, IT SEATS BELOW THE DRIVERS SEAT . CHECK FOR WATER DAMEGE SOME TIMES WATER OR FLUIDS RUN DOWN THERE AND DAMEGES THIS MODULE, IT HAPPENS FREECUENTLY ,HOPE TO BE OF SOME HELP . JP
SOURCE: 1999 porsche boxster cannot lock car with key or
Try replacing the battery in the key. It may be too weak to engage lock.
SOURCE: I need a new key for Porsche Boxster 1997
Only the dealership my friend and it`s going to cost ya.
SOURCE: 1999 porsche boxster; when opening
It sounds like it could be the plastic connecting bit that links the lock tumbler lever to the rod that operates the door lock mechanism, has broken or become disconnected. To check, you will need to remove the trim on the inside of the door, after removing any screws and the inside door lever and window winder.
Once you have the inside trim off and the plastic sheet, you will see an access hole for the door mechanism and the lock tumbler. It should be attached to the actuating rod by the aforementioned plastic bit. If plastic bit appears OK try re-attaching it or replacing it if broken. If the lever part of the lock tumbler which attaches to the rod is broken the lock will need replacing.
Testimonial: "Very useful information for us ?do it your self guys?....."
6.2.
Rotate the key from the center to the unlock position.
6.3.
Press the horn button on the remote keyless entry transmitter.
6.4.
Count the number of chimes that you hear. The number of chimes tells you which mode you have set.
6.5.
Press the horn button again in order to change the mode. Continue to press the button until you hear the number of chimes that indicates the mode that you want.
6.6.
Turn the key back to the center position and remove the key from the door key cylinder.
In order to exit and save the current feature customization modes use the following procedure:
202 views
Usually answered in minutes!
×