SOURCE: how to replace ignition cylinder on a pontiac
Does it turn? Or is it **** in the lock position.
SOURCE: Where is the AC Low pressure valve on a 1999 Pontiac Grand Prix?
sometimes its behind the alternator real close to the firewall. Find the bigger of the two hoses and pipes the low side is always bigger. Also the cap is blue and the fitting for the charging can will only fit on the right valve.
SOURCE: my 96 grand prix's air conditioner compressor will
system is low or empty. you need a high and low gauge to properly check it out or just add a can or two.
SOURCE: I need to specifically know
Not sure what year your car is but on 2004's the low side is low behind the engine on the pax side. Near the alternator.
SOURCE: diagram for surpentine belt installation 1999 grand prix
My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.
I have only been a free contributor to this site for the past 4-months.
I do not know if you still need this information, but I am going ahead and answering it anyway.
CLICK on the following LINK. It has the Belt Diagrams you will need.
The standard rule to removal the Serpentine Belt:
1. Find the Tensioner(s). (See Diagrams on Link)
2. Rotate/Move the Tensioner away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. The Tensioner is spring loaded, and is hard to rotate/move.
3. Remove the loosened belt off one of the other more easily accessed Pulleys.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
http://www.2carpros.com/car_repair_information/year/1999/make/pontiac/model/grand_prix/1999_pontiac_grand_prix_drive_belt_routing_diagram.htm
181 views
Usually answered in minutes!
×