'95 Nissan Maxima-Alarm goes off-then windows & doors won't work

sounds crazy but a locksmith showed me this trick. Open the trunk and remove the pretty cover under the lid so you have access to the trunk lock, there are two wires leading to the alarm for the trunk. pull that off and away from the lock mechanism and once you do that wave a magnet over the flat steel part of it. It will reset your alarm...

did you check fuse number 12 ,(7.5 amp) left side engine compartment box?

if its stock alarm, you must close all the doors and lock then unlock it using the pwr lock button. If this doesnt work try the same method with the key set to ON...hopefully this helpd!!

now you know what sets off the nissan alarm.lock the car,with the key, hold key over for 30secs then unlock with remote.should reset system....you unlocked the car manually so you need to lock the car manually....

try this..sit in the car and lock it with the remote.wait about 1min then try opening doors.without using keys or remote, if it goes off its working.dont worry too much about dash light if the led has gone. leave it alone...

replace the remote's battay

THERE IS A VALET SWITCH TO OVERRIDE THE ALARM. PUT THE KEY IN THE IGNITION AND TURN IT,HOLD THE BUTTON(USUALLY A LITTLE BLACK BUTTON UNDER DASH) AND CRANK ENGINE OVER. THIS WILL START THE CAR AND CUT ALARM OFF

lock and close the doors, then unlock the drivers door with the key

Try this it works for the 95 and 96 models it should also work for all models 95 thru 99. 1st you need to get in the car and hit the lock button on the drivers door switch. Make sure doors and windows are all shut. To program the remote you must insert the key into the ignition 6 to 8 times rapidly in a 10 second time period and when you have done it correct the hazards lights will then illuminate twice. Next then you must hit the lock button quickly on the remote due to a slight time delay only hit the button once. Keep repeating this step until it works and to find out if it worked hold down the trunk button or the unlock button(the front windows should let down on you Mad-Max.

Im no professional but i did recently buy a 93 maxima and i have the same security alarm problem and my powered locks dont work at all. im taking off the door panel today to take a look and see if the alarm sensor is loose or damaged, if it is, ill probably just disconnect it. one thing i have noticed though is that when i hit the lock or unlock button, i hear a faint click from the dashboard area which im assuming is the solenoid on a transistor which would mean that the buttons work but the transistor isnt delivering power. Semi-Solution for Locks: Listen for very quiet click when you lock/unlock doors, if you hear it, uve got major work to do, if you dont, then take apart the door and check the switch connections. Semi-Solution for Alarm: take off the door panel and disconnect the sensor.