2006 Chrysler PT Cruiser Logo
Posted on Mar 01, 2009
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

2004 chrysler pt cruiser with only 25k miles and i got a codes po300 and po301 misfires any help?

  • 1 more comment 
  • katsus7 Mar 02, 2009

    yes it misses and stumbles and just is rough riding and I took to pepboys and they put it on a machine to tell me the codes and they said chrysler has a bulletin about it and when I pulled up my vin# online it said no recalls, so was just wondering if anyone else out there has this problem on this year and what is the likley cause...I know its cyclinder 1 and a misfire so I am having a friend change the spark plugs and wires and see what happens...just have to find them first too though..LOL so any help or info would be appreciated its a 2004 with only 26779 miles on it just got the car 4 mos ago. thnks all

  • walkerfims May 23, 2009

    is there a way to get the error codes to come up on the odomiter?

  • Mike Butler
    Mike Butler May 11, 2010

    Have you felt engine stumble, or running a little rough at any time recently?

×

3 Answers

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

  • Contributor 1 Answer
  • Posted on Jun 05, 2013
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Joined: Jun 05, 2013
Answers
1
Questions
0
Helped
680
Points
2

Falsas explociones en los cilindros revisa bujias cables o inyectores, suerte

Anonymous

Level 1:

An expert who has achieved level 1.

  • Contributor 1 Answer
  • Posted on Mar 08, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Joined: Mar 08, 2009
Answers
1
Questions
1
Helped
680
Points
1

I recently traded my 2004 PT Cruiser in for a 2008 PT Cruiser. I had the exact prolem with my 2004. I also got a code that mentioned low voltage. After I replaced the battery, the check engine did not come back on.

Ad

Mike Butler

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Chrysler Master 6,674 Answers
  • Posted on Mar 03, 2009
Mike Butler
Chrysler Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Aug 14, 2008
Answers
6674
Questions
10
Helped
2892064
Points
19845

Good place to start, but If you check directly with Chrysler there may be a technical service bulletin, that isn't posted yet. Have the codes cleared when work done, and see what happens.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

2004 Chrysler PT Cruiser with P0172 Error Code.

Question edited for typo
Question moved to model category.

Thoroughly clean the Throttle Body and Idle Air Control. Classic causes of 'rough idle'.

https://www.google.com/search?q=2004+chrysler+%22pt+cruiser%22+P0172


Idle Air Control Valve on 04 PT Cruiser??? Where is it??? ...

RepairPal.com https://repairpal.com > ... > PT Cruiser > 2004
Aug 23, 2010 - I want to clean my IAC, but can't figure out where it is exactly. On another website (PT Forum) there is a pic, ... 2004 Chrysler PT Cruiser.

1 answer · Top answer: Sorry, cannot insert photos here. The IAC is mounted on the throttle body
..
1helpful
2answers

2009 Chrysler Pt cruiser check engine light flashing

Dont change things if udont know solution..its just guessin. A flashin enginelite means danger. It often means the catylitic converter is bad. But hav adata stream run at a privateshop to get values to target issue. Codes are jyst approximate n general
0helpful
1answer

CODES P0441 AND P0304 CAME UP ON TEST? WHERE DO I START ON TRYING TO FIGURE OUT THE PROBLEM

P0441 = EVAP PURGEFLOW MONITOR that means insufficient or excessive vapor flow detected during evaporative system .
P0304= a misfire in cylinder # 3 answers to these p0441 a bad gas cap possible , and p0304 possible bad coil on cylinder #3, try clearing codes and see if they show back up or you get bad performance , then try replacing gas cap and then coil pack . I really hope this gets you on the right track .
Woody
0helpful
1answer

2003 acura tl error codes po301 po302 po304 po306 p1399 po300

PO300 and P1399 are random cylinder misfire detected.
PO301 cylinder 1 misfire
PO302 cylinder 2 misfire
PO304 cylinder 4 misfire
PO306 cylinder 6 misfire
I would say that you have damage to the ignition wiring harness or you ECM is failing.
0helpful
2answers

02 hyundai accent engine quit running won t start codes come up po300 po301 po302 not familiar with 4 cylnders when turning over sounds like no compression

codes p 0300 is random misfires and codes p0301,2,3,4,5,6,7,8 are the cylinders that are misfiring
so un you statement the problem cylinders are 1 and 2
misfires are normally problem injectors and low fuel pressures so have the fuel pressure checked to make sure that the pump is running correctly, the pressure regulator is operating correctly ans the EVAP system is venting the tank correctly
use a couple of injector cleaner in the tank to clean the injectors
0helpful
1answer

Misfire on cylinder 4 on my 2004 PT Cruiser

I changed my plugs and wires and my injectors. No change!! What else could I do?
1helpful
2answers

Have po301 code 1 cylnder misfire whats the

anything from bad wire .plug or fuel delivery problem to cylinder 1pull plug and c if fouled -also test wire for break
0helpful
1answer

Audi 2000,1.8 turbo,code po300,po301,po302

P0300 - Combination misfire detected
P0301 - Cyl 1 misfire
P0302 - Cyl 2 misfire

If it has a lot of miles it needs a tune up.
Fill tank with high quality premium fuel
Check fuel pressure
0helpful
1answer

2004 chev. silverado 6.0 liter. The engine code po300 and po322 came up. I reset the codes and po 322 came up again. I just changed the plugs approx. 400 mile ago. Could the codes come from a bad plug or...

Yes they could a PO300 is a generic misfire code. PO301 would be cylinder number 1 so on and so forth. check the resistance of your plug wires they should be approx. 7000 ohms per foot. it could also be a coil over plug. primary resistance of the cops should be 1-3 ohms. but since this is a misfire it would be your secondary. which should be between 20000-30000 ohms. hope I helped you out. Happy Motoring!
3helpful
2answers

2003 pt cruiser has 3 errors they are 440,441 and 303. please help

440 and 441 relate to the evaporative prurge flow system and 303 is a misfire detectec in cylinder 3.
Not finding what you are looking for?

690 views

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...