Help with torque setting for mazda b2500 wl diesel engine

https://www.google.com/search?q=2012+chevrolet+captiva+2.2+VCDi+diesel+cylinder+head+torque+specs

https://www.google.com/search?q=2012+chevrolet+captiva+2.2+VCDi+diesel+big+end+torque+specs

Not too much information on the 2.2 diesel. A service manual is the best idea.

..

no year no joy, no VIN told, that tells country and year and engine,
so RTM read the manual
and
tell them vin
or?
bingo
https://eautorepair.net/Marketing/Default.asp


i must pay too. or google endless for free ones (pure luck)

Hi,

If this is for a mazda vehicle, please call mazda for the specs at (800) 866-1998 Thank you.

What bolt is this your tightening? As long as you have applied the correct Torque setting and the correct number of Degrees you don't need to worry about the final torque reading on the bolt. For areas like cylinder head bolts the final reading will be slightly different for each bolt.

This link may have some of those torque specs. http://www.championbrands.com/aera-torquespecs.pdf

Follow the link mazda b2500 torque sequence and settings cylinder head td bolts

got the repair manual for the
WL engine 676 page zip pdf type file
used in the ranger and drifter
down load and find
ranger drifter engine body and chassis folder
look for
the ranger drifter repair manual ..its 13882 kb

this uses cloud and is safe at the moment
http://www.trinituner.com/v4/forums/viewtopic.php?t=326401
any b2500 engine must all use the same block
looks like mazda had a play with the top ends

..only page 70 has the block drawing
doesnt say ftbs or nm
being metric and mazda would assume nm
this is lined to the crank bearing cap bolts
83-88 ( 8.4-9.0 61-65)

contact parts store or dealer service,

The above image is of the diesel 2.5 cylinder head not the gasoline motor

Cylinder Head Torque in 2 steps [1st (50 - 60 ft-lbs), 2nd (80 - 90 ft-lbs)]