Easy way to change spark plug wires
SOURCE: Spark Plug gap settings.
Look on you're emissions tag under the hood they should be on there.
SOURCE: Cannot change 3 rear spark plugs on 1999 Buick park avenue
there is a special tool for this job but I have cheated on this but you ned to be careful when doing this.The wishbone shaped mount on the front going from motor to front of vehicle, remove and it allows the motor to tilt.
SOURCE: how do you change the spark plugs in my 95 buick century ?
This is a very simple fix. My 1995 (6 cylinder) Buick plugs were really corroded and my engine was misfiring. I troubleshot this issue back to the plugs and replace all of them. I went to AutoZone and they said not to get the high firing plugs, they told me that the ACDelco (cheap) plugs were the best for this issue.
But as far as the changing goes. There are three plugs on the front of the block and three plugs on the rear of the block closest to the firewall. The front three are very simple to replace. While the back three are a little tricky, because they are screwed into the block at different angles. I would recommend getting a hose that can slip securely over the end of the spark plug (where the spark plug wires attach) and using this as an extension when screwing your new plugs into the block. This makes it a hell of a lot easier than trying to start the plugs with a ratchet extension or your hands, especially when trying to get the ones on the back side of the block started!!
Good Luck!!
Clong
SOURCE: How do I change the back spark plugs on 2003 Buick
put card board or old blanket across top of motor and radiator support - lay across engine - plugs can be reached this way on 3.8 motors - this is how i have done this job
1,005 views
Usually answered in minutes!
×