SOURCE: Passenger Air Bag Warning light stays son
is this van new for you ? is it a status light letting you know that the airbag is loaded and ready for anypassenger that you have in your van ? do you have a key that you can turn it off in most vans there is an option to turn air bag on or off depending on size or opinion of passenger . im thinking that if its a status light its okay to be on letting you know its ready for opperation . take a look at your owners manual airbag section . and if it does turn out to be a warning malfunction indicator please dont waste time take it to your local dealer and have it checked out .hope this information helps good luck
SOURCE: air bag sensor light on, and stays on.
the air bag light being on is most likely a mal funtion, they shold have not had to mess with the wiring for the air bag, in the old days air bags had an acellarometer on the otter part of the car on the front of each fender if one was disconnected it would cause the light to come on, since yours is a generation 2, I suspect a different problem, since air bagsare explosive I do not recomend you try repairing it but I have a web page where they can trouble shoot it for you for a very reasonable price, they can tell you how to reset the lamp and tell you what code it is but it cost's $20.00 still cheeper than hooking up a scanner at a shop. here is the site http://www.airbagsolutions.com/contact.aspx you will need to fill in the information and then you can call them and they will be able to pin point it for you, when working on air bag systems always disconnect the battery and wait 5 minutes before testing or pulling anything apart as they can hold a charge in the ignigher for up to 5 minutes and use only a digital ohm meter to test wires as a meter with a sweeping arm can detonate the air bag, and at 170 MPH if you in the way your gonna get burned. hope this helps.
SOURCE: chevy silverado 2006 lights "service air bag"
First of all you need to get this problem fixed ASAP. While the airbag light is illuminated, your SDM (Sensing and Diagnostic Module aka: the brain of your airbag system) shuts of power to the airbags. In which, if you are in an accident your airbags will not deploy while this light is illuminated. You need to take your vehicle to a GM dealership. A Tech 2 scantool is needed to retrieve the code from the SDM. Hopefully it won't be a costly repair, but is something that defineatly needs to be corrected soon. Good luck and hope all works well.
Testimonial: "very fast and helpful, thanks"
SOURCE: air bag light wont go off after cycling 04 chevy express
YOUR VEHICLE HAS DETECTED A FAULT IN THE AIRBAG CIRCUIT IT WILL HAVE TO HAVE CODE RETRIEVAL DONE TO DETERMINE WHAT CAUSE LIGHT TO STAY ON,I URGE YOU TO DO THIS SOON AS WHEN AN AIRBAG SYSTEM HAS GIVEN A FAULT CODE AND TURNED ON THE LIGHT THE SYSTEM IS DIABLED AND WILL NOT PROVIDE PROTECTION IN ACCIDENT
Testimonial: "I tried what you suggested, and it worked the light cycled an went out thanks , david"
SOURCE: Reverse and interior lights out, chevy express van
Fuse block under the hood. Driver's side, under the brake master cylinder. Number 18. TCB#2. Replace the fuse.
There is an under-engineered ground in the reverse circuit. If you back up with the dome lights on, it could blow that fuse. There should be some extra fuses under the cover of the fuse block.
3,029 views
Usually answered in minutes!
thanks for all your help...will try to see if works or take to dealer...
×