Beeping sound in 2005 nissan murano

Keith Methot

• 112 Answers
• Posted on Oct 03, 2008

SOURCE: 2004 Nissan Murano How do you clear maintenance light after oil change?

press maintanence button until you see engine oil, then hold trip/reset button... :)

SOURCE: '06 Nissan Murano factory radio/cd player removal steps

what holds the radio in place besides the 2 side screws in a 2006 nissan murano

SOURCE: nissan murano 2005 sl keyless entry remote programing

Close all vehicle doors, LOCK doors using drivers side switch.

Insert key all the way into the ignition, (do not turn) remove key.

Repeat this step 5 times. (6 total)

Hazards should flash to indicate program mode.

Press any button on transmitter to be programmed, hazards should flash to indicate successfull program.

*For additional remotes, cycle drivers door lock UNLOCK, LOCK, press any button on remote, hazards should flash. Repeat step as necessary.

Ignition ON, (engine off) ignition OFF, UNLOCK using drivers side switch, test remotes.

Source

SOURCE: My 2005 Nissan Murano drivers automatic window

have it reprogrammed..alot of these auto up/down features need to be reprogrammed..or the regulator and mtor assembly may just need to be replaced and then reprogrammed.. have the dealer try to reprogram it first.. i dont think u have a switch problem.. i believe its the reg/motor assembly.

SOURCE: 2005 nissan murano sl, with rattling sound when accelerating

I recently experienced the same symptom with my '05 Murano and it was not a fuel problem. The dealer listed the cause as dry axle splines and replaced both front drive shaft assy's. Note that this was done as warranty with no cost incurred by me.