Question about 2001 Chevrolet Silverado 1500
Id say gas guage is broken i have seen lots of chevys around that year go bad. got to change whole fuel pump which is in the tank. not to bad just got to lift bed some. not sayin that is the problem because of the other things happening but just saying it may be. as for rest i have no clue.
Posted on Feb 11, 2019
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Some vehicles require very specific drive cycles (called "drive traces"
if you perform them on a road simulator or dyno) to activate certain
self-checks like the catalyst and EVAP monitors.
As a general rule, doing some stop-and-go driving around town at speeds
up to about 30 mph followed by five to seven minutes of steady 55 mph
highway speed driving will usually set most or all of the monitors.
Consequently, if you're checking an OBD II system and discover that one
or more of the monitors have not run, it may be necessary to test drive
the vehicle to set the remaining monitors.
You should talk to a good emission tec, if this is not throwing a code, it is hard to say if that one of the components could be bad. O2,pump,convert, HeO2, every part of the emission system.
With a 1000 miles, and doing what is says above just before the test, and ending driving at the test
should be plenty. If it is not, you will have to have each emission part checked, or when the computer
is plugged in it might show a code that did not trip dash light.
Posted on Mar 27, 2009
same bulb but 2 seperate elements. wiring diagram u should be able to obtain from your local auto parts store like autozone(preferred)
Posted on Sep 23, 2009
I had this problem, and to be honest, it happened to the left side about a week later...it's the board that the bulbs plug into...it's a very common problem with this model. So popular that you can normally get the socket board off the shelf at a parts store! it's extremely simple to replace, and I replaced all the bulbs at the same time!
Posted on Oct 11, 2009
Tips for a great answer:
Jun 07, 2015 | 2005 Chevrolet Silverado
Jan 26, 2014 | Toyota Corolla Cars & Trucks
Sep 03, 2013 | 2001 Chevrolet Silverado
Nov 04, 2012 | 2001 Chevrolet Silverado
Mar 12, 2010 | 2003 Chevrolet Silverado 2500HD
Jun 30, 2009 | Dodge Ram 1500 Cars & Trucks
Jun 24, 2009 | 2000 Chevrolet Silverado 1500
Jan 01, 2009 | 2004 Chevrolet Silverado 1500 Crew Cab
46 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: