- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You will need to scan for trouble codes with diagnostic tool for airbag light, make sure you have checked all the lights properly, the tail lights have two bulbs each side so if you look & see light you assume all is fine but one of the bulbs may not be working, also check number plate lamps, easily overlooked
Gday mate, we had a problem with another late model vehicle similar to that, the bulb that was put into the reverse light was not exact brand product ( ohmage was slightly wrong ) and fowled up computer, correct bulb in place and disconnect battery to reset K A M ( keep alive memory) problem solved, BEWARE, some vehicles cannot have KAM reset except for dealer computer tethered reboot , just try putting the factory correct bulb(s) in and see how it goes, geoff. hope this helped.
in the rear lights you may have two bulbs one is the turn signal the other one is stop light / tail light the stop light / tail light has two filaments, one for the stop light (21 watt) & one for the tail light (5 watt) it is possible that the tail light filament is blown, try replacing the bulb to see if that fixes the problem,also check all the fuses as well.......hope this helps......cheers.
These are Dual Function Bulbs. They control the Parking Lights and the Brake Lights. This Bulb is Burnt out on the Brake Coil inside the Bulb. I have actually seen Bulbs that were Bad But you could not Tell by jast looking at them. It should be fine with a New Bulb. Please Rate My Response! Thanks!
×