You didn't specify what type of Dodge... 1500, 2500, 3500 but here is an image of the box on a 2008 1500. Hope this helps.
SOURCE: chrysler 3.3 vin r v6 mini van, starts then dies
Charlie. You have replaced the ECM on your van?.
Kedwin,, Your problem is, the computer on that 3.3 L.
Need to be programed with the VIN nember of your car.
The Antitheft System will disable the injectors due a incorrect VIN, Bucause the body computer is not recieve the correct pasword between 5 seconds after start up.
YOU have 2 options. 1 get a ALOHA Smith. some of they have the computer required to program ECMs.
The other option is: Get a new ECM from the dealer, They will program if ask for that.
NOTE:::::: Other way is . Put the body control module with the computer from the same car.
OK... I hope this work for yours.
If NOT letme know I can look for more information.
Thank you.
SOURCE: Where is the asd relay on my 1990 dakota?
ASD is in the engine compartment fuse block.
The pump relay should be there also. Check your fuse panel in the truck though.
Fuses, Relays & Circuit Breakers
The fuse panel box is to the right of the glove box with the glove box door opened or beneath the instrument panel (dashboard) on 1989-93 models.
Pull out the fuse panel for access to the blade type fuses
SOURCE: Looking for the fuel pump relay fuse on a 2004
Check your owners manual. 2 Places. Under hood AND Left side of dash on the end, visible Only with drivers door open.
SOURCE: Where is the fuel pump relay on a 1990 Dodge
It is a black box on the driver side mounted to the fender.. Black box.. what is your pickup doing? I would pull teh computer an take it in to a Dodge Dealer ship to have them Test it! and check at your local junk yard for the computer. good luck hope you figure it out!
5,793 views
Usually answered in minutes!
×