My 1998 Dodge Stratus is having stereo issues and the light by the license plate us also not working. I have checked and replaced the fuses and they are still not working. I do not have any problems with anything else in the car - Is there something else I should be looking at besides a fuse? Thanks for your help.
SOURCE: 2001 dodge stratus radio
i have a similar problem with my stratus except mine is a 95'. I haven't fully figured the problem out but i have been told to check all of the grounded wires you have hooked to your car.
SOURCE: 2001 dodge stratus radio
I had the same problem and after several test I figured out that the problem is internal to the radio.
I bought a used one on ebay for about $50 and now everything is OK.
SOURCE: # 4 fuse blew out,
I KNOW YOU HAVE AN ELECTRICAL SHORT.WAS AN ALARM INSTALLED OR ANY OTHER TYPE OF ACCESSORY? CHECK WITH DODGE TO FIND OUT ABOUT A RECALL.IF SOMETHING WAS INSTALLED, TAKE IT BACK THERE TO STRAIGHTEN IT OUT IF NOT HAVE A AUTO TECHNICIAN CHECK IT FOR YOU.
SOURCE: license's plate light stopped working even with new bulb.
It wouldn't be a fuse if that's the only light that's not working, I believe all of the parking lights are on the same fuse. It's most likely a bad ground or corrosion inside the socket where the bulb makes the electrical connection. So check the socket to make sure it has no corrosion, if it does, clean it up and apply some dielectric grease (available at any parts store) to prevent future corrosion, and check for a loose or broken ground wire.
SOURCE: License plate lights do not work.
The licence plate lights are in the same line as your tail light wiring assembly. I assume your tail lights are working or you would have got a ticket for that. The wire is either cut, broken or unhooked from the tail light wires (which usually are brown). If you can not find the problem, you can always run a new wire to the tail light wire from your licence plate wire. Then they should work.
Your other problem is that the license plate ground is rusty & not grounding, which would also not let them work, so you should probably check that first. Rick
393 views
Usually answered in minutes!
Yes, I have changed the bulb on the plate - still does not work.
Have you changed the bulb on the plate?
×