At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The starter is located on the lower side of the motor. Disconnect negative battery cable. Raise and support vehicle. Remove flywheel cover (s). Disconnect starter solenoid wiring. Remove starter mounting bolts. Remove shims and note arrangement for reassembly (if equipped). Remove starter assembly. To install, reverse removal procedure. Ensure shims are installed in original location (if equipped). Tighten fasteners to specification. Starter Bolts 35 Ft. Lbs, Flywheel Cover Bolts 89 Ft. Lbs, Positive Battery Cable-To-Solenoid Nut 89 Ft. Lbs, "S" Terminal Nut 37 Ft. Lbs
where you can found it. replacing it can be done under hood, by removing brake booster hose and or by under the vehicle. disconnect first cable going to starter. then need to remove the two starter bolts and starter.
Your Starter Relay, located in the Relay/Fuse Box/Panel is sticking and causing the Starter "Run-On".
Locate the Starter Relay in the Relay/Fuse Box/Panel.
The identification and location of the Relays/Fuses should be located in your Owners Manual, or on the inside rear Cover.
There are usually Relays in the Box/Panel which are the same Type (size and shape). Switch out the suspected bad Starter Relay with another non-engine Relay that is KNOWN to work.
Recheck the operations of both these functions.
If the Starter is not still experiencing "Run-On" and the other function is now malfunctioning. The suspected Relay is bad and needs to be replaced.
Let me know if this helped, or if you have additional information or questions. Feel free to contact me at FixYa.com!
hi from uk the starter motor on accent is located at the side of engine nearest the bulkhead that is the back of engine viewed from the front of car b4 you do anything to it ? YOU MUST DISCONNECT THE EARTH/NEGATIVE LEAD FROM BATTERY! if still not sure of location ? just follow the positive + cable from the battery and it will be connected to starters solenoid do you have a problem? we could advise on?with starter ?
×