IF YOU TALKING ABOUT CHANGE OIL LIGHT.FIRST YOU SWITCH IGNITION ON. SLOWLY DEPRESS AND RELEASE THE ACCELERATOR PEDAL 3 TIMES WITHIN 5 SECONDS.WHEN CHANGE OIL LIGHT FLASHES INDICATING OIL LIGHT RESET.SWITCH OFF IGNITION.THEN START ENGINE OIL LIFE WILL CHANGE TO 100%. NOW IF YOU SEE LOW OIL LIGHT YOU CAN RESET YOU EITHER HAVE FAULTY OIL PRESSURE SENDING UNIT OR WORN OIL PUMP OR WORN ENGINE BEARINGS.DO A OIL PRESSURE TEST.
If the oil light is on it's one of 2 things: You have no oil pressure, or the sending unit (also known as the oil pressure switch) is defective and is reading no pressure when there actually is normal pressure. You should always assume it means no pressure, because driving it this way will ruin the engine.
SOURCE: reset oil light on 01 pontiac grand am
this may sound strange, but it works, turn on ignation switch, but do not start car, pless gas pedel to the floor 3 times quickly, oil light shoud reset
SOURCE: 1999 pontiac grand am alarm
turn the key on for at least 20 mins or so, the security light should stop flashing. This is very common for these cars. turning the key on and leaving it on for 20 mins resets the security system. When the "security system" on these cars activates, all it does is shut the electric signal to the fuel injectors off, the fuel pump still kicks on and you still have spark, but the injectors dont shoot fuel. If the turning on for 20 mins dont work, you will likely need a whole new ignition, and you take the inside out of yours and put it in the new one so you re-use your key. hope this helps
SOURCE: check tire pressure light reset, 1999 Grand AM
Pop the fuse panel cover off the driver side fuse box, you have to open the door to get to it. With the key in the ignition and in the "ON" position, hold down the button in the fuse box that says "reset". The Tire Pressure or Oil Change light will start to blink, let go and push it one more time and the light will go off.
gaframe = true;
' +
'' + google_ads[i].line1 + '
' +
'' + google_ads[i].line2 + ' ' + google_ads[i].line3 + '
' +
'' +
google_ads[i].visible_url + '
';
}
}
var adsByGoogleRight = "-40px";
if(dartRecieved){
document.getElementById("ga_300x250").style.clear="both";
document.getElementById("ga_300x250").style.left = "0px";
document.getElementById("inner_adv_caption").style.display = "block";
document.getElementById("ga_300x250").style.width = "370px";
adsByGoogleRight = "5px";
}
else if(isHealthinationExist){
var healthinationBox = $('healthonationBox');
if(healthinationBox){
var helthinationBot = getObjXY(healthinationBox)[1]+healthinationBox.clientHeight;
var ga_top =getObjXY(document.getElementById("ga_300x250"))[1];
if(ga_top-helthinationBot >0){
document.getElementById("ga_300x250").style.width = "530px";
}
else{
document.getElementById("ga_300x250").style.width = "410px";
}
}
$('boxAdWrapper').style.display = "none";
}
else{
document.getElementById("ga_300x250").style.width = "530px";
$('boxAdWrapper').style.display = "none";
}
//add "ads by google"
var logo_img = '
';
s += '' + logo_img + '';
document.getElementById("ga_300x250").innerHTML = s;
var currl = $('related_links');
var currq = $('related_questions');
if(currl!=null && currq!=null){
var currltop = getObjXY(currl)[1];
if(currltop > rltop )
currq.style.clear="left";
}
return;
};
//-->
SOURCE: Reset Change Oil Light
Hello - I have a 2003 Grand Am GT and to reset my "Change Oil" light, I turn the ignition key to the on position (without starting the car) and fully press the accelerator pedal 3 times within 5 seconds. The "Change Oil" light will flash a few times then turn off.
SOURCE: How do I reset the "Change Oil" light on a 2000
Hello tiffinkie: My name is Roger an I will help you. First open the passenger door and locate the fuse panel located in the end of the dash cover. Remove the cover turn the key on. Do not start the motor. Push the reset button located at the top of the instrument fuse panel.The CHANGE OIL light will start to flash.Press and hold the RESET button again. The reset is complete when you hear the chimes sound and the CHANGE OIL light goes out. Should you need further help please just ask. Please rate your answer. This way I know it was helpful. Thank You for using Fix Ya. Roger
';
s += '' + logo_img + '';
document.getElementById("ga_300x250").innerHTML = s;
var currl = $('related_links');
var currq = $('related_questions');
if(currl!=null && currq!=null){
var currltop = getObjXY(currl)[1];
if(currltop > rltop )
currq.style.clear="left";
}
return;
};
//-->
616 views
Usually answered in minutes!
×