SOURCE: 1994 Toyota Tercel Starter Problems
sounds to me that you have an igniton problem not a starter problem and or if you have or had an alarm system could be cause if u do give me feedback and i will explain but seems that your starter is fine from what u say but if you think in terms of the elemts to start a vehicle batery gives pwoer to ignition which sends to starter which gives spark etc i would check you ignition system something is causeing a short and not alowing starter to function
SOURCE: 2003 parking bulb toyota tacoma
OK, I just fixed mine. The unit pulls out. You have to get a screwdiriver, wrap it with a cloth so it doesn't scratch the paint, then gently wedge the entire unit out. When it pops out, you'll see the clips that keep it in place. You might think its breaking when you pull it out, but trust me this is how you do. Just be gentle with it. After you get the unit out, simply take the socket out and replace the bulb. I did it in five minutes.
SOURCE: Headlights turn on by themselves when vehicle is parked.
Do you have auto lights when it gets dark out? When they come on is it in a parking garage or home garage where its dark If so chances are your switch/relay unit is bad. (or do they come on in daylight too)?
SOURCE: how to remove starter from 1997 toyota tacoma
REMOVAL & INSTALLATION
On all engines except the 2UZ-FE, the starter is external, mounted in
a conventional manner, alongside the engine block. One the 2UZ-FE,
however, the starter is mounted in the 'V' of the engine, between the
cylinder head banks. The entire intake manifold assembly must be removed
to access the starter motor and solenoid. (Toyota calls the solenoid a
"magnetic switch.")
Except 2UZ-FE Engine
Fig. Unfasten the starter mounting bolts . . .
Fig. . . . then pull the starter toward the front of the vehicle
to remove it (other components removed for clarity)
To install:
Fig. Exploded view of a common starter mounting found on Toyota
trucks
2UZ-FE Engine
Fig. The starter motor on this 2UZ-FE engine is installed under
the intake manifold between the cylinder heads, making it a lengthy
procedure to perform
To install:
Hope this help (ermember rated this).
736 views
Usually answered in minutes!
×