At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
The book says 1. remove panel pull strap 2. remove door handle bezel 3. on 1995-2001 models,remove power accesory panel and trim panel upper extension. 4. remove armrest screws and pad. 5. remove window handle,I guess if not power windows.
KD makes a tool to go in between door panel and door to pop the door clips loose. KD 3705
You will also have to have a window crank tool if it is manual window. KD431
Hope that will help.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
remove the door panel and see if theres power to the power lock actuator is so the actuator is bad if not power locks remove the door panel and check the linkage rods
You'll need to replace the door latch assembly. Not very difficult - the door panel has 3-5 screws in it (all hidden so you'll have to find them), once removed the panel will pop of with enough force - just be careful of the electrical connectors for the window and door lock switch. Remove all the rods from the actuator, remove the Torx screws holding it to the door body, and pull it out. Disconnect electrical connector...and reverse above procedure to reinstall.
remove the sound insulator under the dash on the passenger side,remove 1 screw on the access panel and remove 2 filters.you can find the video at 1AAuto.com.
What your hearing is the door stop which needs some lube. You should be able to accomplish this from the out side using grease or white lithium. The mechanism in the middle of the two hinges is the door stop and keeps the door from opening to far.
Start by removing the insert located at the door handle. It should come out using a screw driver. Pry up thw eindow control unit and remove, locate the screws should be one at the door handle and two at the bottom. Pry up on the panel and pull toward you. If the panel will not pull up look for some more screws.
Remove screw from inside door grab handle. Remove door panel by carefully prying out plastic clips. Drill or chisel off pop rivets holding the handle on. Pull handle out far enough to disconnect linkage and remove handle. Install new handle and secure to metal panel with new pop rivets or sheet metal screws. It may be easier to reconnect linkages by removing the metal panel also.
u need to remove the door panel see if the cable is broken or jammed it will lock up the motor its very common the door panel comes off easy look it up the whole assembly cost about 100 bucks easy to install every thing is on the web
×