Its starts up good, when putting it in gear or when coming to a stop the rpm drops to where it wants to cut off. after putting it back in park after about 5 seconds the rpm will go back up to where it suppose to be.
Does it change if you put it in neutral at a stop?
Testimonial: "no"
SOURCE: 99 Jeep Grand Cherokee Laredo
Hi Guys!
I work in a transmission and torque converter remanufacturing plant and have seen this many times! I hate to tell you that your transmission is shot! There is metal in the fluid and some of it got caught in a solenoid not letting fluid through to shift the gears. You will need a rebuild! About $2500 dollars. Of course if you in Pittsburgh, Pa. area I could do it for about half that. Any questions e-mail me at [email protected]
SOURCE: serpintine belt
This link will take you to a picture of the diagram. If the link doesn't work contact me and I can email you the picture directly.
http://autorepair.about.com/library/illustrations/bl506a-lib.htm
SOURCE: 2001 jeep grand cherokee laredo with trany prob.
Throttle Positioning Sensor About 45 dollars and 3 mins to change. Its by the throttle body. JULES
SOURCE: 1993 Jeep Grand Cherokee Laredo wont drive when put into gear
No, not with out a lot of work. Electronics are most likely different on the 2 also.
SOURCE: how to permanently disarm alarm on 1995 Jeep Grand Cherokee Laredo
#1 solution for this is to " BUY A GM PRODUCT" & save your money on costly repairs of these chrysler & JEEP (amc) vehicles!
343 views
Usually answered in minutes!
×