I have change the crank shaft sensor, the car ran for a week and now it back doing the same thing.i put another crank shaft in, and that is not the problem,, were is the cam shaft sensor on this motor,, 1993 3.3 dodge caravan
The Cam Sensor senses a slot on the camshaft gear (part of the timing gear set) It is located at the front of the engine behind the engine mount plate near the top of the timing cover. Be aware both the crank and cam sensors need to be properly adjusted for clearance or they won't send a good signal. The factory procedure is to install a stick-on disc spacer. It looks like a felt pad, it spaces it properly then when it is started it gets rubbed off the sensor and falls into the crankcase. I have found a few crankshaft sensor rings (which are part of the flywheel) that had been tweeked from transmission or engine replacement.
It is on top of engine at the back were the cam-shaft is hope i have helped you
299 views
Usually answered in minutes!
jcboy
×