Fluid color don't matter. Your cable or shifting linkage may have slipped or is slipping. #1 Hold brake pedal down and move shift lever very slow around the reverse indicator. When reverse activates note were indicator is located. #2 Test the other gear indicators at the proper speeds(MPH). No problems with #2-linkage problem. Problem with both-go get a six pack. Good Luck.
SOURCE: ford transmission not shifting
i think you got a bad transmission...thats what it sounds like anyway
SOURCE: need wiring diagram for 2008 ford crown victoria
Hello,
You can purchase the wiring diagram for $5.99 from the following site: http://www.wiring-diagram.com/. You can also purchase a wiring diagram book from the following link: http://cgi.ebay.com/ebaymotors/2008-FORD-CROWN-VICTORIA-MARQUIS-WIRING-DIAGRAM-MANUAL_W0QQitemZ120394723100QQcmdZViewItemQQimsxZ20090320?IMSfp=TL090320147007r15080.
Hope this helps,
Chris
SOURCE: 1992 crown vic 4.6l
Check the ground cable I had a bad ground on my 92 vic I replace the starter the battery then I found out the ground cable was bad replaced it and it starts prefect now
452 views
Usually answered in minutes!
×