Hello had the same problem in my 2006 Isuzu I-280 I needed to
replace at this moment the Evaporative Valve Soleniod which is instaled next to the Vapor Canister. It is mounted on the frame behind the gas tank you will have to move the spare tire out of the way one bolt holds it in place this is where the canister is and the valve is mounted on the canister this is where it is mounted on my 2006 I-280. If you need to replace the solenoid and you can't find the original Isuzu part, you can ask for the 2006 Chevy Impala V-6 3.5 Purge Valve Solenoid. It is the same piece. The old Evaporative Vent Valve Solenoid has a number part PA-GF30, and it is the same part number I found in the new Chevy Impala Evaporative Vent Valve Solenoid.
SOURCE: Mustang GT 4.6 EVAP Canister Purge Valve Location?
You will need to remove the right front wheel & wheel well liner. The canister purge valve is behind the cover. It should have two tube going into the bottom and one on the side near the top.
You can fix it!
If this helps you out please rate me!
Brett
SOURCE: where is the purge valve located on a 2004 honda LX?
It is with a 2 wire Black connect located next to the throttle body. Locate the green cap on the evap hose and follow it to the throttle body and that is the purge valve.
SOURCE: 2006 gmc sierra 1500 4.3 . check engine light on.
More than likely the evaporator vent valve.
356 views
Usually answered in minutes!
×