You know i tried once a old trick and it worked. If a bulb doesnt want to switch off remove the bulb.
Two ways of doing this.
1; remove battery negative and wait for about 5 min
2; Remove main fuse and wait 5 mins.
Either way it resets the computer in a odd way.
If still not working some immobilizers are situated under the right side front wall panel. Once youve found it remove the plug and remove the imob. Take it to your local dealer and have it checked out. This is where the next question arises. If the find the unit faulty needless to say you need to purchase a new one. If they dont find a problem, then you need to tow your vehicle to the shop and let them via the main computer reset the codes. Also let them checkout your key. sometimes this could be the culprit.
SOURCE: key fob for hyundai elantra not working
Please dont worry yourself so much the security locks needs to be reprogrammed to enable it work effectively. Same happens to other vehicles as well.
Consult Hyundai garage close to you or if you have it in your manual.
Good luck.
rate this.
SOURCE: Central locking issue on my Land Rover Discovery II 2003
Does it open from the outside once you have manually opened it from the inside.
SOURCE: central locking
turn key twice when opening, ie turn right. once drivers door will unlock, turn twice passengers doors will unlock, and locking is turn anti clock wise once will lock all doors, turn twice will set door dead locks.dead locks will stop openand lock internal button working and handle from opening door. the same actions can be applied to the remote one press drivers door, two press passenger doors, press and hold unlock button for 5 seconds and rear window will open.
149 views
Usually answered in minutes!
×