At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
There should be three screws holding it in from behind. They will be three long post looking type of stand offs. Remove those and the whole assemble will come out with a pop.
The bulbs are replaceable without removing the headlight lens. Open hood and look behind the headlight lens. You can twist the black round housing holding the bulb socket counter-clockwise and remove bulb with socket. remove bulb thru collar. Install new bulb (DO NOT TOUCH THE GLASS PART WITH YOUR FINGERS). Reconnect.
Hi there, together with providing you the solution to the problem, I also took the liberty of going one step further in giving you steps on how to remove the headlight bulb.
Find the hood release handle and activate it, the hood should pop open.
Once the hood is popped open locate the hood secondary or safety latch and release it. Then finish opening the hood.
Locate and remove mounting clips for any plastic shields that cover the headlight lens mounting screws or clips.
Some headlight bulbs can be replaced by simply grasping the bulb socket behind the headlight lens and turn it counter clockwise to remove it. This will expose the headlight bulb.
If the headlight bulb socket is not accessible the headlight lens may need to be remove or obstructions behind the bulb removed to gain access to the headlight bulb socket.
To remove the headlight lens remove all mounting screws and clips that hold the headlight lens in place.
After the headlight housing has been removed from it's mounts, release the headlight bulb from the headlight lens housing (turn counter clockwise) the bulb will then come out of the headlight assembly. Once removed, visually verify that the replacement bulb is exactly the same as the failed bulb before to ensure a proper repair.
Clean the headlight lens free from all debris to help maintain the seal from the bulb to the lens. This will keep moisture out of the lens.
Install the new headlight bulb by turning the retainer ring or bulb clockwise.
Re-install the headlight lens housing and reinstall electrical connector.
Re-install plastic covers.
After the job is complete turn the ignition key to the "on" position and activate the headlight switch. Observe the newly replaced headlight bulb to ensure proper operation.
The procedure is as follows:---First you need to open the hood and twist the bulb socket out from the lens.1)Remove the screws retaining the headlight and trim assembly. 2)Carefully rotate the headlight and trim assembly away from the vehicle, rotating the inboard side away from the vehicle. 3)Remove the side marker, parking and turn signal bulbs and sockets from the headlamp and trim assembly. They can be removed by turning them. 4)If replacing a lens, remove the retaining screws for the lens to be changed and remove it from the headlight door. ---------Thanks.Helpmech.
Open the hood, look at the back of the headlight. There is a black sleeve that the head light wires run through, turn the sleeve and slide it back on the wires,unplug wires,& pull bulb out of headlight. reverse procedure to replace bulb.
You open the hood reach behind the light assm. and unplug the light grab the lock collar and twist it towards the drivers side and remove then grab the back of the bulb and wiggle up and down while pulling out then reverse the process to install note; do not touch the bulb with anything otherwise shotened light life will result.
Jim
×