IT should not be necessary to do this. Loosen off the belt /belts and when you have the one needing replacement place a section of the belt over a fan blade and turn the fan and place the belt over the next blade and son until all the belt is in front of the fan. pull the belt out from In front of the fan. Replace the belt buy by a reverse procedure.
SOURCE: manifold removal
my favorite thing to use on stubborn bolts is pb blaster. its fantastic for those rusted on bolts. not sure if thats any help to ya bro but good luck
SOURCE: i need instructions to install a clutch fan on 1987 bmw
The fan/clutch assy has left hand thread. Loosen by turning clockwise.
Remove radiator top shroud & air cleaner assy. to gain access.
Remove engine cooling fan by holding the belt drive pulley with a suitable flat bar tool (that fits over the top of the drive pulley attachment bolts), then using a suitable flat spanner to unscrew the fan clutch assy (clockwise). When re-fitting, tighten clutch nut to 30 ftlb.
You may need to use a bit of ingenuity in making the flat bar holding tool, unless you are able to procure the BMW tool #11.5.030.
Good luck
SOURCE: 1992 bmw 318i making a squealing noise on startup
find a detail shop that has spray wax it will be blue in color spray some on it just alittle it will stop it
199 views
Usually answered in minutes!
×