SOURCE: 2002 Izusu Rodeo timing problems
Check with your local Izuzu dealer, there is a procedure to set the cams in proper relationship with each other. This involves turning the cams up to 8 rotations to have them "jump" into the proper spot. I have had the same problem and found a bulletin that shows the correct way to time the engine.
SOURCE: water pump replacement 96 isuzu rodeo
Remove belt, fan, fan shroud and fan bracket. Remove timing covers, timing belt and water pump. Replace timing belt and the hydraulic tensioner with new ones. I suggest you get a mechanic to do this as you can easly get it out of time. Not an easy job.
SOURCE: trouble getting marks aligned on 2001 Izusu Rodeo
if its a 6VE1 engine you might want to remove rocker covers and put front lobes of camshafts in position shown in picture with cam gear timmed up at same point cam gear are 3:1 ratio
look closely at cam gears in pic to see front lobe positions for both banks
SOURCE: 1995 Isuzu Rodeo 4cyl 5-speed 2.6L engine starts
make sure you are using the right firing order and all the plugs are good i head this problem could just need to adjust the timing just a bit
129 views
Usually answered in minutes!
×