no engine options stated, now THAT is a challenge, x100.
4.0L or 4.7L?? 3.1L, 2.7L AND 4.7HO (EXPORT)
ASKING WITH OUT ENGINE TYPE IS HOPELESS. !!!
i Just wing it, and try to guess.
this is not the Diesel engine , right? is this a USA car or export?
this is a USA site so we must ask that. (nobody does but...must)
the FSM covers this, the factory service manual.
45RFE and
545RFE automatic transmission
the p07 are all transmission errors from the TCM brain.
p04xx is EGR, failure, so skip that. for now.
a/t limp means the TCM , see's gross errors. why it does, takes TESTING. by a technician,
not Gue$$ing, .
here is book for 2002. (USA only, ok ?)
http://www.jeep4x4center.com/knowledge-base/index.htm?utm_source=cj#service
see emission page for all DTCs.
700, 702 and 703
702 is not listed, is that a non USA market engine?
i see lots of posts on 702 or Diesel , why is that? and missing in the gas, FSM i have. ??????
700 means ,Ive got tranny errors see others for why.
703 is brake lamp stuck on failure.
579 --
Cruise control system inoperative
1130
P1130 Oxygen Sensor Circuit Low Variance (Bank 1, Sensor 1)
my guess is this is the first scan in 10 years. and all those codes
are antique? reset the PCM and drive and see the codes that
are real for NOW.
(all cars do that after writing them all down as you did)
2125 (not in my usa FSM oddly)
but googling finds one diesel here.
Throttle/Pedal Position Sensor/Switch "E" Circuit
that is all i can do , with
NO COUNTRY STATED
NOR which of 5 ENGINES USED .
sorry !
×